my takeaway is don't buy from this company.
this post was submitted on 05 Jan 2026
104 points (98.1% liked)
3DPrinting
20849 readers
213 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 2 years ago
MODERATORS
Pretty much every companies tries that. I had a 1000 Eur projector whose lamp failed after 7 months of basic "evening TV" use . Clearly unreasonable. The company tried to argue we needed to pay 200 Eur for a new lamp because we exceeded its lifetime hours. Clearly bullshit but not much I could do since they labeled the lamp as consumable. I managed to get them to send me a replacement for 100 which lasted 3 years
Hint for the next time: projector companies only sell the bulbs in a cheap metal cradle and they ask for a butload of money for that.
But you can also get the lamp without the cradle from Amazon or similar places. It's the same lamp since projector companies don't manufacture the lamps themselves, usually its Osram. And if you buy the lamp without the cradle you pay a quarter of the price of with a cradle (at least that's the price difference on my projector).
You then just have to pop the old bulb out of the cradle and put the new one in, it's super easy.
Just look at the bulb in the cradle and google the product name of the bulb.
Funnily enough, the same thing goes for battery “packs” in UPS units. The UPS costs ~$2500? The replacement “packs” will cost a few hundred dollars at least. But the batteries are standard 99.9% of the time, and cost 1/4th the pack if you simply disassemble your existing pack and transfer the hardware onto the new batteries.
I’ve saved hundreds doing this, and since the batteries are standardized, you can usually find a great deal on them beyond their regular price.
There's a lot of business around just repackaging things and selling them for multiple times the cost.
Ah thanks for the tip. I was able to find lamps and cradles together for 100 Eur but I never thought to look for just the lamp anymore. I was stopped buying lamps when I realized I could buy a new projector for the same price as my optoma lamp after like 8 years of having it. Unfortunately those projectors don't seem to be made to allow for lamp switching.
Out of the curiosity I checked for my old optoma hd28dse lamp as you suggested and it's around 60 without the cradle.
Yeah, it was 50 for mine, so quite similar.
I'm considering switching to laser/led, since the power consumption should pay for itself after a few years, but didn't get around to it, so now my 12yo projector is on its third lamp.
I always just replaced the bulb and kept the cradle.
Tbh, that lamp+cradle combo is a plain scam. No way the cradle is worth €150, but most people will just check the suggested lamp (which is lamp+cradle) and the projector manufacturer makes €150 off a small piece of aluminium.
Ye it's a complete fraud. Glad I switched projectors tbh
Creality fucking sucks, the only good thing about them is that they're cheap (which is also a bad thing).
Their software is somewhat open too, and you can root it unlike some other printers
If it wasn't open, they would be violating the licences of the FOSS projects it's forked from. Their firmwares inherit GPLv3 from Marlin, and CrealityPrint inherits AGPLv3 from slic3r (via Orca Slicer, Bambu Studio and PrusaSlicer).
There are some companies that violate GPL. Guess what happens to them? Nothing (unfortunately).
I did up a few of the printed ones that use mouse click buttons and they are way better
Link a the best?
I had them replace it 3 times before I got a working one. By the time it was delivered I’ve returned my Ender 3 V3 KE and got…K1. I am much happier with it though, and I’ve even mounted that CR-Touch on it at się point;)
Creality is for printing virgins. Move on as fast as you can.
Meanwhile bambulab do not want to recognize an issue which could lead to a fire...
Anet2
tl;dw?
The NTC Thermistor apparently becomes really hot, really fast (near its rated limit), which in itself is not a problem, but the surrounding components are not rated for that temperature and can melt.
Is that on all models? I have an A1 Mini
?
"too long; didn't watch"
Was looking for a summary; watching an 18-minute video to get a two sentence summary seems overkill.
Many users have reported issues where some had a burned hole beneath the printer, due to a thermistor that is barely enough to support the charge. They have discussed this with some Bambulab employee (off camera) at some convention where they said to be aware yet bambulab officially do not want to recognize the issue.
Thank you!
...What company would you recommend if I do decide to start printing virgins?
Prusa, all day long if you want to be 3d printing. Then build a voron if you want a 3d printer hobby.
Yes but when do you start printing the virgins?
Once you've set it up and sliced the model.
Not a consumable since they sell replacement probes.