323

I found it at the dollar store.

top 50 comments
sorted by: hot top controversial new old
[-] jet@hackertalks.com 169 points 8 months ago* (last edited 8 months ago)

Don't think of it as a tiny cable, think of it as a gender bender. You can put on the end of some female cable.

You're more likely to see dongles like this at fixed installations. Like somebody puts a USB port into a wall, like a speaker's podium, or a presentation stand. So one side is fixed, depending on what you want to hook up to it, you might need to have a gender bender.

[-] Starshader@lemmy.ml 56 points 8 months ago

Is the cable considered transgender after that ?

[-] jet@hackertalks.com 69 points 8 months ago

USB is bi-directional. So it really doesn't care about the plug gender. Some other protocols are directional, then the plug gender is very important, so adapters for directional protocols tend to be more expensive, it may even require external power.

Once USB on the go was invented it cease to matter at all.

[-] essellburns@beehaw.org 34 points 8 months ago

Today I learnt my sexuality is USB

[-] lud@lemm.ee 23 points 8 months ago

Universal Sexual Bus?

[-] x4740N@lemmy.world 12 points 8 months ago

What your describing sounds more like a double ended dildo

[-] jet@hackertalks.com 28 points 8 months ago

As long as the double ended dildo provided low impedance electrical through ways, and distinct electrical paths for at least four conduits, with minimal capacitive cross talk... then yes

[-] meyotch@slrpnk.net 16 points 8 months ago

I like you and your style. Do not let a stupid dirty joke get in the way of proper electrical and data connections. It tells me where your priorities are and I respect that.

load more comments (1 replies)
load more comments (1 replies)
[-] Hurensohn@lemmy.world 125 points 8 months ago
[-] FUsername@feddit.de 36 points 8 months ago* (last edited 8 months ago)

The stars of username, comment and upvotes aligned

load more comments (1 replies)
[-] Hellstormy@lemmy.world 104 points 8 months ago

Have you never just wanted to plug 2 PCs into each other back to back?

[-] whoisearth@lemmy.ca 72 points 8 months ago
[-] Artaca 37 points 8 months ago
load more comments (2 replies)
[-] Buffalobuffalo@lemmy.dbzer0.com 15 points 8 months ago

Back and forth, forever.

[-] x4740N@lemmy.world 72 points 8 months ago

If you think about it, this is the USB equivalent of a double ended dildo

[-] stebo02@sopuli.xyz 14 points 8 months ago

does this mean there's also double ended flesh lights?

[-] n00b001@lemmy.world 12 points 8 months ago

Isn't that the nickname of your mum?

[-] Nioxic@lemmy.dbzer0.com 71 points 8 months ago

It turn@ a usb extension cable into a regular usb

I guess that could be a use case?

[-] ook_the_librarian@lemmy.world 23 points 8 months ago* (last edited 8 months ago)

Or turn 2 extension cords into a long one.

But a serious answer is that these are sometimes sold in a kit of adapters that would let you change the head. Most kits like used a normal cord as the base cord, but some used USB extension cords as the base cord. So this is meant to be a replacement part, not useful in its own right.

load more comments (1 replies)
[-] stebo02@sopuli.xyz 10 points 8 months ago

wouldn't that just make this thing longer? we'd still have the same problem

[-] Bishma@discuss.tchncs.de 16 points 8 months ago

There are female-female USB extension cables. As to why those exist...

load more comments (3 replies)
[-] flakeshake@feddit.de 56 points 8 months ago* (last edited 8 months ago)

Such A-to-A adaptors and cables always have been prohibited by the USB spec, but people built them anyway. A common usecase for "illegal" A-A cables i remember was connecting PCIe cards (especially GPUs and mining cards) externally to riser sockets.

[-] accideath@lemmy.world 23 points 8 months ago

I have an external 3,5“ HDD enclosure that needs a male to male USB 3.0 A cable to plug into a PC. Still wondering, why they didn’t use B…

[-] lud@lemm.ee 12 points 8 months ago

That's really odd. Why use a host connector when a client connector is intended for the purpose.

Did they entirely miss the purpose of USB?

[-] accideath@lemmy.world 11 points 8 months ago

Cost? A USB-A 3.0 connector is probably a few cents cheaper than a B 3.0 connector

load more comments (1 replies)
load more comments (3 replies)
[-] jet@hackertalks.com 11 points 8 months ago

https://en.m.wikipedia.org/wiki/USB_On-The-Go

In 2001 the directionality became kind of moot. Especially if you want to do attach something with an on-the-go host

[-] nottheengineer@feddit.de 13 points 8 months ago

An OTG setup needs all 5 pins of the micro-B connector. USB A cannot be used for OTG. If a USB-A port can act as a client, that's not OTG, it's a botched implementation.

load more comments (1 replies)
[-] Z4rK@lemmy.world 52 points 8 months ago

I’ve used them for extension, as it allows you to attach a second, regular USB cable to it.

[-] iAmTheTot@kbin.social 14 points 8 months ago

Well, what do you mean by "regular"? The cable would need to be female on at least one end, which I usually see in... USB extension cables.

load more comments (7 replies)
[-] trailing9@lemmy.ml 42 points 8 months ago

Sometimes you have a female to female cable.

[-] Murais@lemmy.one 25 points 8 months ago

You ever watch Requiem For A Dream?

[-] Fraylor@lemm.ee 10 points 8 months ago

ASSSSSSS TO ASSSSSSSS

[-] Franzia@lemmy.blahaj.zone 23 points 8 months ago
[-] tkk13909@sopuli.xyz 23 points 8 months ago

LUSBian sex obviously!

[-] blackn1ght@feddit.uk 20 points 8 months ago

I dunno but it bothers me how much plastic wrapping that fucking thing apparently needs.

[-] theKalash@feddit.ch 15 points 8 months ago* (last edited 8 months ago)

To connect two USB-A ports.

Basically the same as a USB-A to USB-A cable, just really short.

load more comments (25 replies)
[-] LazaroFilm@lemmy.world 13 points 8 months ago

I used to have a portable hard drive that had a usb-A/ e-sata hybrid connector and I had to use a USB A to A cable (or e-data) to use it.

[-] Rand0mA@lemmy.world 11 points 8 months ago* (last edited 8 months ago)

Get 2 laptops, put them side by side with usb ports wide open and plug them bitches together. Likely will short with 5v being fed both sides.

But in reality its a usb coupler (plugging together 2x usb extension cables). Not a great lot of use from them in my opinion. I've seen shit bodged together in low budget it offices using edge case crap like this.

load more comments (1 replies)
[-] Ravi@feddit.de 10 points 8 months ago

It's an Usb-A gender changer. It's not that useful but you could use it to turn an otg adapter (female usb-a to male usb-c) into a regular usb-c cable. I'd rather buy a usb-c cable though.

[-] nicocool84@sh.itjust.works 10 points 8 months ago
load more comments (1 replies)
[-] sounddrill@lemmy.antemeridiem.xyz 9 points 8 months ago

Many cheapo sata connectors need a cable like this(I use a male A to female micro b and then a female micro b to male A, it gets the job done)

But connector, idk

load more comments
view more: next ›
this post was submitted on 10 Oct 2023
323 points (95.2% liked)

Asklemmy

42431 readers
1262 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy 🔍

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~

founded 5 years ago
MODERATORS