You'll get faster download, but your upload speeds drop off a cliff
Use another fan to make the wifi circular, then your upload speeds shouldnt be hindered
Then you add ping by changing the path
You can counter those with a pingpong bat.
If you play pong online, your ping will be super low.
If you make a series of tubes, you can route from the router and reroute back to the router, creating an information highway through, what we call in comp science, a "loop". Depending on which side you install the turbo, you can replicate the same tech your ISP charges extra for in "speed boost". If you go bi-turbo—one in inbound and one in the outbound tubes of the loop—you can generate effectively unlimited speed, where onlyfans used in your inbound and outbound tubes limit based on their RPM. This is why I use RC plane turbines. It's loud, but I'm streaming YT in 480.
If you put all this in a very small tube that you can easily plug into your router and your PC, then we've got real innovation on our hands!
I am a computer programmer, this is exactly how it works. Why else do you think electronics have fans in them if not to blow fresh, crisp wifi in and stale, soggy wifi out?
The trick is rewiring the outlet to 240v. More power = more signal.
Will probably make the signal noisy, so I'd avoid this. I would recommend just putting the router in a booster seat, so it's higher off the ground.
No no, everyone knows you're supposed to put a mirror behind it, duh.
Funnily enough this may actually have a positive impact
People used to create tinfoil, tin can or wok based reflectors for WiFi to guide the omnidirectional signal into becoming a directional one.
I think the reflective part of some mirrors is essentially tin foil, so it probably would have a mild boosting effect in the direction of the mirror
Edit: in fact if OP's fan has a rounded metal cage on it, you could take the front half off and you've basically got a WokFi setup there, with added danger
A wire in a Pringles can makes for a fabulous directional can-tenna
Also if it's close enough, the metal of the fan itself serves as a pretty decent antennae. You can accomplish the same by taping a fork to the box!
It's the silliest little lifehack yet wrapping a wire around a fork, then wrapping the other end around the router works so well
My boss almost saw me looking at this. Close call.
Not Safe Fan Wifi
Can confirm, I'm this guys boss
Get back to making me work!
No because the fan that is boosting the Wi-Fi to you would prevent your computer requests to the Wi-Fi box.
So while it'll be easier for you to get a YouTube video It would be harder for you to actually type a search. 👍
NSFW?
If you work in IT and want to keep your job, it would be NSFW to say something like this
Reminds me of the time I worked in IT and someone put a department's wifi access point on top of the microwave. No one fessed up to that one lol
I had a friend complaining that his new computer I built for him was crashing a lot.
So I go there and spend a good bit of time trying to make it crash. Nothing.
Then his girlfriend gets bored and picked up the wireless phone. Bam ! Computer crashed!
It had to happen another time for me to realize it crashed when she was picking up the wireless phone. Turns out the phone base was on top of the computer. Tha cpu was a AMD 950MHz and the phone a 900MHz phone. I have no ideas if the frequency is at fault or the phone base was creating bad interferences somehow but taking the phone base away from the computer finally solved the problem.
May work in niche cases where passive cooling is insufficient and overeating causes Instabilität.
INSTABILITÄT!!!
yes and you can also leave out a plate of cookies where you want a strong signal so the wifi waves will go there when they're hungry
Ask ElectroBOOM, he would definitely make a video rectifying it *bang* OUCH F___ S___ why is there a loose wire?
Radio waves are faster in a vacuum, ditch the fan and put it in a shop vac.
Putting a fan begin your router won't boost the range because photons emitted by the router's antenna won't be affected by moving air from the fan. Putting a floodlight however...
Alright, so according to Bernoulli's principle says that moving fluids result in a lower air pressure. Light and all electromagnetic waves are fastest in a vacuum. Lower air pressure is closer to a vacuum. So... Marginally? I have no idea how much but I'm guessing it's miniscule enough to need special equipment to detect. Not worth it. Plus the fan itself could block the waves. The fields around the wires powering the fans would have an effect as well. All of this is going to be super minor but I think the physical blockage of the fan is going to have more of an effect (but still teeny tiny) than anything.
If it has metal blades then it will reflect some of the radio signals, making the transceiver more directional. With how it's set up in the post, it could potentially be a benefit to devices that face the front of the router and fan, but a disadvantage to devices behind the fan. Same logic with that Facebook trick of putting tin foil or cut up drink cans behind the antennae.
However, most newer and higher end routers use beam forming antenna arrays which are already directional and can automatically focus the signal toward your devices. Having reflectors around those can actually interfere with the antenna array and decrease speeds for all devices.
Well... WiFi is bidirectional. It may be faster receiving but the device sending... Other story than the tcp handshakes...
Technically yes, but in practice any gains are going to be counteracted if not outweighed by the electromagnetic noise from the fan's motor. To avoid that interference and see any real improvement in your signal strength, you'd have to either use a fan with a shielded motor (the last such model went out of production in 1953, so good luck finding one) or a fan driven by an alternative power source such as a water wheel.
The wifi beams come out in all direction. You can help boost the wifi by placing a mirror behind the router. Then the rays will be reflected back to you and not wasted.
It will help cool the router, so yes, it will probably work 👍
It works better if you tie the router to the fan blades.
I mean... closing the window keeps the wifi in so I think this will disperse the wifi instead.
You need an aether fan, but yes.
