122
Having a flipper zero in LA is cool because...
(hexbear.net)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 23 Oct 2023
122 points (100.0% liked)
chapotraphouse
13469 readers
821 users here now
Banned? DM Wmill to appeal.
No anti-nautilism posts. See: Eco-fascism Primer
Vaush posts go in the_dunk_tank
Dunk posts in general go in the_dunk_tank, not here
Don't post low-hanging fruit here after it gets removed from the_dunk_tank
founded 3 years ago
MODERATORS
I use mine for cloning key fobs when i need work access to a mechanical room after the fob has been returned. Lot of times i need access to a mechanical room or rooftop drains and cant get a copy of a fob. No problem, most of the time. Only run across two i couldnt clone and i think it was operator error.
I also turn off loud tvs with it. And at the machine shop across the way, i like to pop the charging port on the Tesla the owner drives. Im still looking for a gas station with RF signage so i can see if that works.
Flipper is a neat bit of electronics, but its sorta like a swiss army knife - it does lots of things ok but there are better solutions out there.
Please speak more of these better solutions..
Proxmark3/4 and a laptop for 125khz and 13mhz cloning and attacks, HACKRF one (any tx capable SDR that can get into khz range) and gnu radio and whatever custom built antenna you need for whatever frequency youre working.
I could never get those tiny TV-Shut off remotes to work reliably. for reasons of ADHD I despise televisions in public places.
Those things are pretty hit or miss. Fickle, poor quality IR LED, not a very large code base.
The IR database for the Zero is pretty comprehensive. Televisions, stereos, dvd, air conditioners, fans, etc. quite literally everything with a IR LED. It also has the ability to ‘learn’ new remotes that it doesnt have preprogrammed. I have yet to find a TV it cant control.
Not really. If you can clone a car keyfob then it's effectively useless and your car is probably a Kia lmao
Fobs use a rolling code to prevent cloning, among a lot of other techniques.
Texhnically, yes, you can.
However, new fobs use rolling codes. Youll likely get it paired, use it once, then when the code rolls, you end up deauthorizing your fob because it is behind on rolling code. Sometimes itll work for a few uses, if you have multiple keyfobs (it has to do with how the vehicle, Fords in particular, handle the way code is used) but YMMV.
Old school keyfobs work, tho. Garage doors are much the same.
Even new garage doors use rolling codes, for exactly this reason. People could break into houses with a flipper and a little patience.
Cloning a fob that has rolling codes, and then using it to unlock the car, may de-auth the real fob and lock the person out of their car until they pay (sometimes $$$) to get it recoded. So, unless you have actual malicious intent it's a pretty shit thing to do.