40
Inland, which I believe is eSun. Because I live very close to a Micro center
Jealous!
I live 4 hours from the nearest microcenter. I still make the drive periodically.
They ship their filament for free. That's how I get mine because I'm 5+ hours from the nearest store
Yeah I know, and maybe it’s my imagination, but it seems like the stuff I get in store is better than the stuff I get online.
Definitely your imagination. Microcenter isn't doing anything but rebranding eSun or Polymaker made filament.
I also use Inland, haven't had any issues with the filament. All the problems are my printer settings.
I've really like the Overture PLA Plus that I've used so far. Makes nice prints with fine details. Threads on a support stand screw came out much better I expected. Using an Ender 3 S1 Pro with the 0.4mm tip. Just got a roll of Polymaker PLA Pro in the mail today actually, hoping I have time to try it this weekend. Expecting good things from it.
I'm a huge fan of Overture 3D matte PLA. It's inexpensive, and just prints really well with few problems.
ESun pla plus. Consistent, reasonably priced in quantity, rarely out of stock.
I would say the same but I have five rolls of theirs that no matter how long they dry they basically crumble apart, did it right from the bag too. So I dunno what’s up with their QC but that’s pretty bad.
Ouch. I wonder what causes that? I’ve had good luck, I guess.
Honestly don’t know either. Never had this happen before but surprisingly if I’m careful it prints fine if I don’t use the ams. 🤷
Jesse PLA from Printed Solid is my go to. Great range of colors for $21/kg and it prints like it's $30/kg filament.
And it's named after their dog.
I'll also throw my vote on Jesse, with mention of Prusament. Both have been fantastic quality.
Jesse FTW. It’s so consistently good. I’m through about 15kg so far without a single hiccup.
Yeah, I've had no complaints. I subscribed to their filament of the month club for a while, but it was 2kg every month and I soon ran out of storage space.
Anything locally sourceable. For me it's a local company called Eureka Technologies that sells filament for a good price, but also in between batch filaments called Random for $8 that's perfect for prototyping.
Other than that there is a local Canada Computer that sells ANet, Sunlu, and flash forge filament that works well enough.
Which is Natureworks PLA. I suspect a number of the types listed in this thread is as well. Eureka is nice in that they list exactly which source material it is right on the spool. Plus they use cardboard spools with the empty spool weight listed. Brilliant.
Sunlu pla plus from Amazon. Has been very reliable through different colors and spools on my ender clone.
For PLA, Overture is what I use for my painterly prints and primary colors. Hatchbox for some of their more interesting designy options. Polymaker when neither of the first two is what I want.
Upvote for Overture, my favorite.
Polymaker
Polymaker polylite PLA pro. The Polymax PLA is more expensive and less rigid. The PLA pro is only $2 more a kilo than regular polylite PLA and significantly stronger. Many colors are more matte than esun PLA + which is similar in cost and performance.
Yeah I love ploymax too. The pro prints thick though so you have to go hotter and slower. Their polylite PLA is still really great and has more colors so I like using it for for fast prototypes and things that don't need the strength.
Honestly their petg is a go to as well. I found prints to be much more consistent and better quality than similar cheaper petg I've been tempted to try by Amazon deals.
Not just for PLA either, they are my default brand for all filament unless they don't make the filament I need/want for a project. Reasonably priced, consistently available, and high quality.
Love polymaker for the natural filament.
Esun pla+ has never failed me although Sunlu/JAYO's meta pla isn't bad either
Polymaker (specifically Polyterra for PLA). I occasionally use Prusament when I get freebies from Printables but it’s far too expensive for general printing.
Our defuault PLA at work is all recycled stuff from Reflow, especially the candy collection.
I use hatchbox, they have plenty of colors and I haven't had any quality issues with them. Probably only like 2 bucks a roll more than the cheap stuff anyway
Hatchbox seconded. They’re pretty consistent as far as quality goes. Unfortunately they don’t always have their full selection available.
I've had a lot of success with atomic filament. It is a little more expensive, but it's US made. Push plastic is another US based brand I've had a lot of success with.
Both are $30 for their 1 kg spools, but they both offer 3 kg spools at a better price point per kg. I personally like larger spools. It helps me avoid the fear of hitting the bottom of the spool as often and I usually only need one color at a time.
For various colors, I honestly like IID Max PLA+. I've never had trouble printing with them. With their bulk ordering you're looking at about $12/kg
I like Overture PLA. I bought a bunch when they went on sale. I've started ordering from Filaments.ca to support a canadian business. Their Econofil line works well too.
Inland is good.
Ive not actually had a truely bad roll of PLA but I also don't bargin hunt on Amazon.
I have settled on eSun because that's what my local supplier have.. I find polymaker seems to be of better quality, but not all colors are available here..
I've been pretty happy with the consistency of both Inland and Overture.
Primaselect PLA.
It is said to be 12 times stronger than regular PLA. I can confirm that it is strong. Maybe not "12 times".
It's fluid and easy to print, it tends to warp a little. More than regular PLA, much less than ABS. I print it on a non heatable bed, so it's not that bad.
Why I love it : the colors are vivid ! The magenta is really magenta.
Proto Pasta is a really good brand! If you happen to live near their warehouse, you can pick up your order same day
Wooahh this is next level!
Everything has printed good for me except iboss brand
Polymaker Matte Cotton White 3kg
this post was submitted on 29 Sep 2023
40 points (95.5% liked)
3DPrinting
15527 readers
64 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS