[-] Buelldozer@lemmy.today 8 points 3 days ago* (last edited 3 days ago)

You can have both a labor shortage and mass unemployment. It occurs when workers are skilled for an industry with decreasing or no demand while another industry that requires different skills has increasing demand.

A good example of this is the high demand in the US for so called "Blue Collar" jobs. We have a shortage of trades people (Electricians, Plumbers, HVAC, etc) and far too many Business and Marketing people. There's 100,000 MBA's out there looking for a job and there's 100,000 Plumbing Contractors trying to hire someone.

[-] Buelldozer@lemmy.today 120 points 1 week ago

How did they get 376 to show up without any of them roid raging their way into doing something other than dicking around?

Some of them tried and were actively prevented from doing it by other Officers. The whole situation is actually worse than most people realize.

20
submitted 1 month ago by Buelldozer@lemmy.today to c/guns@lemmy.world

New York may become the first state to bar gun companies from selling pistols that can easily be converted into machine guns.

[-] Buelldozer@lemmy.today 135 points 1 month ago* (last edited 1 month ago)

I'd like the Steam Machine to come back with the addition of being an HTPC. Why? Because Valve is big enough to arm wrestle streaming services into releasing an official app.

I basically want a user customizable, privacy respecting Xbox.

[-] Buelldozer@lemmy.today 191 points 2 months ago* (last edited 2 months ago)

C'mon Vox...this article is straight garbage.

First you link to the wrong god damned instance of this case at SCOTUSBLOG (McKesson v Doe 2 instead of McKesson v Doe 3) you then don't link, or you know just post, Justice Sotomayor's remarks about why SCOTUS didn't hear this case for the third time.

Of course you probably chose not to link, or state, her full remarks because if you HAD then you wouldn't have been able to write that inflammatory headline.

SCOTUS already resolved this in 2023 with Counterman v. Colorado. It's right there on pages 14/15 in the linked PDF.

Modern Media is a raging dumpster fire of inflammatory bullshit.

Edit: In case it's not clear this Vox article was carefully crafted to leave the reader ignorant and outraged.

13
submitted 2 months ago* (last edited 2 months ago) by Buelldozer@lemmy.today to c/protonprivacy@lemmy.world

I read the sidebar and didn't see anything about asking questions so apologies in advance if this post breaks a rule.

I'm in the U.S. and wanting to knowif Proton Family is a good choice for my use case.

Two decades ago I got tired of changing email addresses whenever my ISP changed so I registered my surname as a .net vanity domain and started running my own email server at home. When Google started offering Google for Organizations for free if you had less than 10 users I folded up my personal email server and shifted everything over. We use it for e-mail and basic family calendaring.

Last month when going through bills my wife and I were once again frustrated by coordination required to sign into various accounts. "Hey what's the password for $CreditCard?" or "What's the MFA you just got for $BankAccount?" or "What's the password for Disney"?"

That got me started looking for a family password manager so we could easily share and keep this stuff up to date.

At the same time we realized that were paying for YouTube TV, YouTube Premium, two YouTube Music, and an Amazon Music subscription. Whoops.

Well, no problem. We'll just "family share" the YTTV and YTP subscriptions so everyone has everything and we save some money.

Nope. G-Suite doesn't allow family sharing. So we're all going to have to create seperate @gmail.com addresses to make this work. Oh, and I'll have to shift the YTTV subscription from my vanity domain to a regular @gmail as well. Which breaks the entire idea behind the vanity domain in the first place.

While I researching a Family Password Manager of course I found Proton Pass. While I was looking at the pricing for it I realized that they also have a "Family" setup for email which looks interesting.

So now I'm considering porting my vanity domain and all it's email out of G-Suite and over to Proton Family. At nearly $300 a year it's not exactly inexpensive, since I'd basically be paying it until I die, and it will be a fair bit of work to switch everything over so I don't want to do it unless it's going to work.

So would Proton Family be a good choice? Are there any significant technical challenges to migrating a custom domain and email out of G-Suite and into Proton?

Edit: This post was rambly and unclear. The TL;DR is that I’m increasingly annoyed with G-Suite and since I’m looking at Proton Pass anyway I'm wondering about Proton Suite (which includes Email, Calendar, and Pass).

[-] Buelldozer@lemmy.today 156 points 3 months ago

The Title Company has to be sweating bullets right now. It's their whole job to prevent problems like this.

[-] Buelldozer@lemmy.today 104 points 3 months ago* (last edited 3 months ago)

The "No Fly List" is unconstitutional garbage. The list is secret, you can't get the fuck off of it, and it's absolutely riddled with errors.

I applaud SCOTUS for not allowing the Federal Government to retract Fikre's listing and then claim the issue is "moot" to avoid a potentially unfavorable ruling.

The No Fly List needs to be de-invented. Immediately.

[-] Buelldozer@lemmy.today 139 points 3 months ago* (last edited 3 months ago)

It's all kinds of bots; Russian, Chinese, Liberal, Conservative, but most of all its Reddits own bots meant to inflate traffic stats ahead of the IPO.

[-] Buelldozer@lemmy.today 140 points 4 months ago

Another great example is "Chunk" from the Goonies (1985). He was considered so fat that it was comic relief. Now you can walk through any Middle School in the United States and find dozens, if not hundreds, of kids that are MUCH larger!

17
submitted 4 months ago* (last edited 4 months ago) by Buelldozer@lemmy.today to c/homeassistant@lemmy.world

Always surprises me when I go to do something in HA and realize that I can't figure out how.

This time its lights, specifically making sure that they don't get left on.

Until now I've simply been creating an automation for each light switch so that if it changes state from Off to On and when it's 30 minutes after sunrise it's starts a 15 minute wait and then changes the state of the switch to off.

This approach mostly works but it's less than ideal.

First I'm having to create an automation for each device. How do I do it by Area, or list / group of devices, instead?

Second if a device is turned on too early there's no state change for the automation to catch and it never fires. I could fix this by creating another automation that checks for it but then I'll have even more of them to manage.

Third this doesn't work very well if you want different things to happen on the weekends as opposed to during the weekday. For instance on a Saturday I may WANT that closet light to stay on longer because I'm putting away clothes.

It'd be really nice if I could program HA like this 'On a weekday if you see any device on this list turn on 30 minutes after Sunrise I want you to turn whichever one(s) it was off again 15 minutes later.'.

I'm must be missing something here because surely HA can do this, right?

17
submitted 6 months ago* (last edited 6 months ago) by Buelldozer@lemmy.today to c/homeassistant@lemmy.world

Shortly after the ratGDO v2.5 was released I ordered one and a couple of days later I ordered a case from Etsy to go with it.

Two days later the Etsy seller messages me asking if have the v2.5 or v2.5i because the cases are different. WTF? There's already a new version?! I tell the seller to make it the v2.5i because that's probably what I'll get.

So last week I received a very nice red case from the Etsy Seller HighTower3D out of the North Carolina. Seriously, this thing is nice. The build quality is high, it has magnets in the bottom for mounting, comes with allen screws (and the allen wrench you need) and a couple of little zip ties.

So this week my ratGDO shows up and...it's v2.52i! A quick check of the website shows that there's now a v2.53 and that makes four revisions in the last month!

You can't make this stuff up so all I can do is laugh...and give away the v2.5i case that I spent $26 on and doesn't fit the ratGDO version I ended up with.

I have no use for this case so I'm giving it away to someone who can; make sure you have a v2.5i though because this call will NOT fit any other version.

If you are in the United States and can use this case then leave a reply below. 😊

16

I ordered some sidewalk heating mats from HeatTrak and I want to automate them with HA so that they come on when it makes sense to do so based on the data from my Tempest Weather Station.

According to HeatTrack my mats will have a combined resistive load of 5A which is well within the spec of the Zooz ZEN05 or ZEN14, both rated for 15A resistive loads, but when I asked them about it they did not recommend using either of them with heated mats. They couldn't, or wouldn't, explain why and it doesn't make sense to me why this wouldn't work.

My next thought was to simply swap the outlet to something smart but this is an outdoor outlet so it needs to be GFCI and there's essentially no Z-Wave GFCI outlets made.

Do I really need to use something like an Enbrighten Z-Wave Plus 40-Amp contactor for this or am I missing something here?

17

I have an automation that turns my driveway lights on when motion is detected. It normally works fairly well but it was windy last night and that caused the automation to trip endlessly as my trees and bushes were whipping around. Lights would come on, shut off 10 minutes later, then turn right back on again. It basically did this all night until I disabled the automation.

I'll do some fine tuning of the motion sensors which will help and I'm considering adding a condition to the automation where it won't trip if the wind speed is above a certain level but how can I add some kind of cool down timer to the automation to prevent it from endlessly engaging?

12

First the layout. My garage is setup similar to this one, although mine is attached, has three light fixtures, and my driveway is 4 cars wide.

The wife wants me to replace the three basic on / off fixtures that we have (they're getting rusty) and keep them all matching. If I'm going to do this I want to add a camera to the setup.

Functionally I'd like the lights to have or work like they have dual bright capability where they come on full bright at sunset then after a couple of hours they dim down unless they detect motion. If they detect motion then they come back to full bright for a period of time then dim back down again. They do this for a set period of hours, say 4, then they turn off completely unless they detect motion.

My current lights are already automated for on / off (but not dimming or motion) through the use of HA and a z-wave switch.

Where I'm getting stuck is that I can see at least three ways to do this but none of them are perfect.

  1. Replace my dumb carriage fixtures with new dumb fixtures then change the switch to a dimming version plus add a motion sensor and camera out front. Then setup HA for the functionality I want. The upside of doing it this way is that it's very easy to get matching fixtures. The downside is that the motion sensor and camera will not be well integrated visually.

  2. Replace my dumb fixtures with ones that have dual bright built in. It's easy to do, and I could even keep the HA Automation I have setup now, but again the camera setup is not going to integrate well visually. I'm also concerned that three motion sensors controlling three lights will cause trouble for the camera (or each other) because they will react to different things and turn themselves on and off independently.

  3. Replace my dumb fixtures with smarter ones. In the center position I'd use one that has an integrated motion sensor and camera. This Reolink seems like it would work pretty well. However RL doesn't make any fixtures that match it, which means my center fixture would look different than the other two.

I may just have to deal with mismatched fixtures but does anyone have any suggestions? Am I missing an option?

[-] Buelldozer@lemmy.today 96 points 9 months ago

Lemmy really really needs instance blocking. Yes I know some clients have it but Lemmy itself needs a way to enable users to fully block another instance and all of its communities.

[-] Buelldozer@lemmy.today 122 points 9 months ago

This is way way wider than just browsers. Anything that can display webp images is vulnerable and that includes things like MS Teams and Twitch.

36

The next step in my HA journey is adding cameras; indoor, outdoor, and doorbell so I've been exploring my options. I had originally intended to do a Frigate setup, I even have a Coral module and PC to do it with, but then I discovered Reolink.

Without having any experience with them they look nearly ideal. They seem to have tight integration with HA 2023.3 or later and their pricing and functionality look good.

They seem like a no brainer but I've noticed that they're often NOT the first recommendation in the HA Community. Why is that and why shouldn't I use them?

[-] Buelldozer@lemmy.today 149 points 9 months ago* (last edited 9 months ago)

This particular School District has pulled this stunt so many times that the State of Texas passed a damn law, called the CROWN Act, to make them stop! They're back it claiming that the CROWN Act doesn't regulate length or color.

The CROWN Act sailed through the Texas Legislature with strong bi-partisan support and Gov Abbott even held a formal signing ceremony for it. How god damned racist do you have to be that even those people think you've gone too far?

2
submitted 9 months ago by Buelldozer@lemmy.today to c/ubiquiti@lemmy.ml

UDMP is running UniFi OS 3.1.16 and I need a specific VPN configuration that StrongSwan supports but isn't possible to do in the GUI. Three years ago the files I need were located in /run/strongswan/ipsec.d/tunnels/ but they are no longer there. Does anyone know where they live now -or- how to edit a VPN config outside of the GUI?

[-] Buelldozer@lemmy.today 177 points 10 months ago* (last edited 10 months ago)

Could be that civilians don't want to be near them because they are scared. Russian soldiers returning from Ukraine are committing all sorts of violent crimes.

I mean would YOU want to be within 20' feet of someone who has a high likelihood of being drunk, suffering from PTSD, and a member of an especially violent and brutal military force?

view more: next ›

Buelldozer

joined 10 months ago