134
Was trying out a new stitch to attach leather to my 3D Printed part. I love the results (lemmy.world)
submitted 5 months ago by the16bitgamer@lemmy.world to c/3dprinting@lemmy.world
8 comments fedilink hide all child comments

Here is the reverse side:

For the long and short of what this is. I make 3D Printable e-reader cases that are held together by stitching cloth or leather. Up to now the cover had the magnet as a part of the design, but with no way to upgrade or change it out. This is my solution for that.

With 8 screws and a tight fit, the cover can be swapped out when you upgrade or change out your e-reader. That way you can keep the case itself and just upgrade the components you need when you need it.

Still testing it, but very happy with how it turned out.

top 8 comments
sorted by: hot top controversial new old
[-] dkc@lemmy.world 10 points 5 months ago

That looks really good. I might have to consider something like this for my projects. I’ve done a little sewing but never worked with leather before. Do you have any recommendations for learning?

[-] the16bitgamer@lemmy.world 9 points 5 months ago

Recommendations for learning. Have someone who knows how to hand sew nearby to ask questions. My local leather shop has classes to help newbies.

That said I didn't take those, as I had a really good idea on what I wanted, and someone nearby that could teach me to sew. Plus I used cutting machines to do a lot of the heavy lifting.

My only advice is to not use a vinyl cutter like from Cricut or Silhouette. The motors are not strong enough to cut actual leather, they fetch and loose steps very easily. Laser is your best bet, though the smell is pungent, ventilation is required.

The other advise is unlike cloth, you need to plan and make your stitch holes before you sew. Leather is too thick to punch through it without significant force. A Sharp knife is your best friend if you missed a hole.

[-] Sir_Kevin@lemmy.dbzer0.com 7 points 5 months ago* (last edited 5 months ago)

I've done some 3D printing and leather craft in the past. I never would have thought to combine the two! This is really cool!!

[-] AliasVortex@lemmy.world 4 points 5 months ago* (last edited 5 months ago)

Very nice!

I was wondering if that'd be possible but was never brave enough to attempt it. I do have another fun intersectional application though: custom stamps. Not nearly as long lived as brass/ metal, but way cheaper especially for low volume, plus you can embed magnets so they stick to an arbor press. (Just remember to hit the top with a quick sanding to knock off any extension artifacts)

[-] TopHatExtraordinaire@programming.dev 3 points 5 months ago

Looks good! Does this ever cause overheating? I don’t usually use covers for my kindle but I like the look of what you’ve made.

[-] the16bitgamer@lemmy.world 8 points 5 months ago

To clarify, this is what my e-reader case looks like

What this replaces is the side without the e-reader. As for overheating, never been an issue since the e-reader is exposed to the air and the heat goes through the screen.

[-] TopHatExtraordinaire@programming.dev 4 points 5 months ago

Oh gotcha. Yea that definitely makes more sense than what I was imagining.

[-] tal@lemmy.today 4 points 5 months ago

Also, I don't know for sure about other e-readers, but the Kobos I've had are not what one would call high-power-consumption devices; part of why the battery can last so long. I don't really recall them heating up.

this post was submitted on 28 May 2024
134 points (98.6% liked)

3DPrinting

15519 readers
134 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
j4k3@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee