547
rule (files.catbox.moe)
you are viewing a single comment's thread
view the rest of the comments
[-] tacosanonymous@lemm.ee 52 points 3 months ago

I can’t think of a not insane reason anyone would need one.

[-] King_Bob_IV@startrek.website 45 points 3 months ago

People want them around the holidays because they hang their lights in the wrong direction and end up with 2 female plugs where they needed one to be male.... So the want the danger adapter because they are not wanting to take anything down

[-] tacosanonymous@lemm.ee 51 points 3 months ago

I absolutely do not consider that to be a sane reason.

[-] King_Bob_IV@startrek.website 14 points 3 months ago

Nope should anyone.

[-] glizzyguzzler@lemmy.blahaj.zone 5 points 3 months ago

That happens tooooooooo

[-] Jimbo@yiffit.net 3 points 3 months ago

Then doesn't that just make a closed loop with no power?

[-] glizzyguzzler@lemmy.blahaj.zone 9 points 3 months ago

So someone wires up lights around a bush or tree and one side ending in a socket is powered correctly. But they fucked up and the line to connect to it is flipped; it isn’t a pronged plug but rather another socket.

So instead of rerunning that flipped line of lights, they go cut two extension cords to create The Naughty Plug and use it to run power from the powered socketed plug to the unpowered socketed plug, leaving an energized prong plug vibing somewhere at the end of the line ready to maim, murder, or incinerate someone.

[-] glizzyguzzler@lemmy.blahaj.zone 31 points 3 months ago* (last edited 3 months ago)

You can run something like a house off a generator with one if the main breaker is off; in an emergency and the operation reasonably well planned out (don’t overload wall lines you plugged into, etc.) it might be a net benefit. On the reg is asking for death cause there’s safe ways to do it that sane people would plan for on the reg

[-] biscuitswalrus@aussie.zone 10 points 3 months ago

That would surely only power a single circuit (due to isolation) and if you have to be selective, a critical circuit like your fridge isn't really likely to have a wall port on the same circuit near where you'd happily have your fume emitting generator..

I'm no electrician but I've generally installed automatic transfer switches (ATS) for mine site server cabinets that then power UPS racks and the transfer switch automatically or manually can switch from mains to generator if mains power goes out (which at a mine is all the time). I feel like a similar and safe system must exist for homes. Or something no different to switching solar to grid and back.

But again, not an electrician.

[-] Toes@ani.social 11 points 3 months ago* (last edited 3 months ago)

In your typical household panel there is no isolation. If you're lucky there's a GFCI for the bathroom and kitchen.

Edit: not to imply GFCI provides isolation either

[-] princessnorah@lemmy.blahaj.zone 6 points 3 months ago* (last edited 3 months ago)

Which is insane to me. RCDs have been required on all household circuits for decades in Australia. Literally saved my life when I was doing dumb shit as a kid.

Edit: Also, by typical, you mean a typical American household :P

[-] Toes@ani.social 6 points 3 months ago

I was thinking British, but my understanding of the technology you mentioned I don't see any clear reasons why it would prevent back feeding?

[-] princessnorah@lemmy.blahaj.zone 3 points 3 months ago

It didn't. The mains was on, and the plug was in my hand. My dad, in a typical show of his wonderful parenting, told 9-year old me to plug it in while he went outside to the fusebox to turn the main circuit off. The power came back on while I was walking out to the back shed. I still got a pretty big zap, in the eyes of a kid anyway.

[-] biscuitswalrus@aussie.zone 4 points 3 months ago

Wait so, if your kettle fails, your fridge loses power for example?

[-] glizzyguzzler@lemmy.blahaj.zone 9 points 3 months ago

In Murica, the kettle tripping a circuit breaker would knock out the fridge if the fridge was on that breaker circuit. Anything not on that circuit breaker is fine.

No isolation here just means that if the breaker doesn’t trip, the kettle’s circuit and fridge’s circuit are connected together in the circuit breaker box by copper bars.

[-] biscuitswalrus@aussie.zone 3 points 3 months ago

Ah yep that makes sense though I'm following now

[-] orcrist@lemm.ee 10 points 3 months ago

Circuits are connected to the circuit breaker, so it would power whatever is on the breaker. (Or more precisely, whatever is on that leg of the hot.)

[-] glizzyguzzler@lemmy.blahaj.zone 7 points 3 months ago

If you disconnect the mains then the power will be backfed through one of the circuit breakers and back out to others. If the breaker you plugged naughty plug into is off, it’s isolated. Otherwise, it’ll power whatever circuit breakers are on on the breaker panel.

If you don’t disconnect from the mains you’ll kill a person working to fix the electrical lines for your neighborhood.

Yes, safe and automatic things exist to switch automatically - or even hook up a generator in a pinch manually but safely (no naughty plug needed).

Defo don’t backfeed your abode unless you’re gonna die due to some major emergency!

[-] biscuitswalrus@aussie.zone 3 points 3 months ago

Oh okay, I see.. Or rather, I see I don't understand lol

[-] glizzyguzzler@lemmy.blahaj.zone 4 points 3 months ago

That’s fine, electricity is weird! I stay away from naughty plug because if you do everything just right you’ll live another day, if you do anything wrong you’ll kill yourself or someone else. Saying no to naughty plug should be sufficient for you too ;)

[-] desktop_user@lemmy.blahaj.zone 2 points 3 months ago

Wires don't have a direction

[-] Duamerthrax@lemmy.world 12 points 3 months ago* (last edited 3 months ago)

At work, I have a freezer with a couple thousand dollars of product in it. If I lost power and only had male plugs to jerryrig the generator into the circuit, I would. BUT only after turning the mains off and padlocking the panel shut. I didn't have to do that as I just wired the generator directly to the freezer after disconnecting it from the mains.

[-] Agent641@lemmy.world 11 points 3 months ago

Wait, an electrical outlet can be an inlet too?

Mains outlets aren't smart, they're just wiring with contact points. If you feed power into an outlet, it'll energize the circuit it's on, which is a bad idea if your mains circuit breaker isn't off.

[-] jjagaimo@lemmy.ca 14 points 3 months ago

Technicaly it is connected through the breaker so you could only supply as much to the rest of the house as that breaker can pass. Not ideal or the proper way of doing it though. Also the reason to disconnect from the grid is that you could start feeding downed power lines, and if line workers go out to work on the lines they can be electrocuted. Also, theres no telling when power will return. There should be a separete input for the generator and a transfer switch to switch between the generator and grid.

[-] Natanael@slrpnk.net 10 points 3 months ago

There's a reason why home battery storage systems needs to be connected to the breaker panel. You route power through it. When the batteries aren't needed then it's just a dumb relay for grid power. When you're drawing power from batteries it disconnects the grid.

Only a few industries ever draw power both from grid and local power sources at once (during peak load) and they route all the power sources through a power distribution system which prevents backfeeding.

[-] DogWater@lemmy.world 13 points 3 months ago

Yes. It's called backfeeding I believe.

[-] WayTooDank@lemmy.world 8 points 3 months ago* (last edited 3 months ago)

Any outlet can be an inlet if you are daring enough (don't do it with water mains though)

this post was submitted on 31 Jul 2024
547 points (100.0% liked)

196

16554 readers
1956 users here now

Be sure to follow the rule before you head out.

Rule: You must post before you leave.

^other^ ^rules^

founded 1 year ago
MODERATORS