Beautiful, but the first thing to come to mind: "That looks like an accident waiting to happen"
Strong down force with the appropriate screwdriver (looks like it started out as a Phillips head) while turning the driver with a wrench. You need a square shaft in your screwdriver or clamp with vice grips.
Same, strong down force, but use a square driver ( Robertson screw). This can also be accompanied with a wrench.
Drill it out. This is pretty much the last resort as you will use a drill bit about the same size as the threads which will pretty much take the head of the screw off as you drill into the threads. The threads probably won't come out but you will at least be able to open the case. I have had very little luck with screw extractors and they probably don't come that small.
Strong down force is the main thing I have found to work when breaking loose pesky screws. Pushing down hard enough to prevent the bit from skipping to the next slot
They already have, no?
Cool ceiling tile
2001: A Space Odyssey still holds up pretty well both technically and narratively.
Both reading and watching The Shining really helped me appreciate what Flannigan pulled off in making Dr. Sleep. He kept all the lore and nostalgia of Kubrick's movie and also found a way to put back most of the King material that Kubrick had abandoned.
MIT Professor Paul Samuelson’s famous quip, “the stock market has predicted nine out of the last five recessions”
Acid buildup in muscle tissue. Here is an article that explains what is happening:
Esit: I originally said that your.muscles are creating waste chemicals quicker than your bloodstream can handle causing those bad chemicals build up locally. While this is true in a broader sense, I think it is more nuanced that that. Reading the article should give a better explaination
One Sheet, Two Pages A sheet of paper has two sides. Each side is considered one page. So a single sheet of unfolded paper is two pages.
Looks like two pages at a time to me.
Looks like the concrete falls off on the right.
The gasket at the bottom of your overhead compresses to help create a seal along an uneven surface, but it can only do so much. Your gap may be too large to seal before the door bottoms out completely on the left. That said, there is adjustments that set where the door comes to a stop when closing, check your manual and see if the overhead can lower further.
You forgot to include alcohol!
Seriously, though, it just appears to me that it wouldn't take much to turn that situation into a tragedy but I don't know a darn thing about sailing. I went one a few charity motorcycle rides and they felt the same: too many people who's abilities are unknown and mostly likely more than a few who were drinking.