557
submitted 8 months ago* (last edited 8 months ago) by TheDude@sh.itjust.works to c/main@sh.itjust.works

Hello sh.itjust.works community,

Many of you have been eager to get an update about when the sh.itjust.works instance will get it's upgrade to the latest version of lemmy. Here's a update along with a tentative timeline.

In December 2023 I purchased a new server for this community. It took me awhile but I eventually made the time to get it racked at the local datacenter. For the sysadmins lingering and those interested here are the specs:

  • Dual Xeon 2.9Ghz CPUs (32 cores total)
  • 256GB ram
  • 4 x 1TB SSD in raid 10 (with room to add 6 more disks)
  • 10gbit networking

While I'm ready to proceed with the upgrade, I've decided to first migrate this instance over to the new hardware. Here are two reasons.

  1. Those of you who have been around long enough may remember that I've been running this instance on "borrowed" unused resources that were available at the time. There are no more resources available for this instance to grow.
  2. There are reports that the latest version of lemmy may use more resources. Given we are among the bigger instances, should I end up in a situation where I need to increase resources to keep things fast I'll be restricted.

Here's the tentative timeline:

Task Date Expected Downtime
Migration to new server Tuesday February 27 2024 @ 8:00PM ET 90 Minutes
Upgrade to V19.3 Thursday February 29 2024 @ 8:00PM ET Up to 120 Minutes
  • If anything major goes wrong on the 27th I will revert back the changes and bring the instance back up on the current server.
  • If anything major goes wrong on the 29th I will revert back using an earlier snapshot. If that fails, I will restore from a backup.

During these two planned events those who want to provide moral support or who want to get periodic updates are more than welcome to join us on our matrix channel

=========================================================
Update February 29 2024
We've successfully completed the upgrade to v1.9.3. I'm happy to announce that we did it in an astonishing 27 minutes, a whole 93 minutes under what was expected. The extra leg work that was done over the last few weeks combined with the better hardware definitely played a part. Looking over the processes, it looks like the service responsible for images is still doing some work so it's possible that you will come across some broken images. I'll be keeping on eye on that over the next bit and make adjustments if needed. Thank you all for the support and to all of you who kept me company on our matrix channel. Have a good evening.

=========================================================
Update February 27 2024
We've successfully completed the migration. I'm happy to announce that this instance is now running on its new hardware dedicated solely to this community! We experienced just under 40 minutes of downtime which is a whole 50 minutes less than expected. Please give this instance a chance to catch up what it missed but we should be good within the next 30 or so minutes. Thank you

(page 2) 50 comments
sorted by: hot top controversial new old
[-] Ziggurat@sh.itjust.works 9 points 8 months ago

Looks like the site was down this morning. Was the migration done earlier ? or just some downtime ? Good luck for the migration, It's an opportunity to use my alt account on fedia, so not that bad

load more comments (2 replies)
[-] BlueEther@no.lastname.nz 9 points 8 months ago

Good luck from one small instance that just moved VPS providers and upgraded to 0.19.3. I ho no issues except for email died and I had to figure out the new hosts email gateway that was lacking lacking in some of it's documentation

[-] PlzGivHugs@sh.itjust.works 9 points 8 months ago

Thanks for the update.

Looking forward to the new update.

[-] HerbalGamer@sh.itjust.works 9 points 8 months ago

Woohoo!

Now, can anyone point out what -if anything- changed for us end users?

load more comments (3 replies)
[-] jack@sh.itjust.works 8 points 8 months ago

Nice job on the migration! Excited for the update!

[-] FigMcLargeHuge@sh.itjust.works 8 points 8 months ago

Just want to say Good Luck and we're all counting on you!

[-] Ziggurat@sh.itjust.works 7 points 8 months ago

Félicitation à toute l'équipe, merci pour votre travail

[-] ItsComplicated@sh.itjust.works 7 points 8 months ago

I appreciate everything being done on our behalf. Thanks Dude!

[-] Srootus@sh.itjust.works 7 points 8 months ago

Please let us throw monies at you

[-] CancerMancer@sh.itjust.works 6 points 8 months ago

That's a relatively low spec server, I thought it would be worse. What does the co-location cost?

[-] sugar_in_your_tea@sh.itjust.works 6 points 8 months ago

Dang, I was looking forward to being productive today, but you were just too quick.

[-] Rez@sh.itjust.works 5 points 8 months ago

I've encountered a problem, not sure if it's related to the update or not. On both Eternity and browser my Subscribed feed shows posts from All. From Eternity only upvoting posts fails with a 401 code, but I seem to be able to do it on the browser. Any one else encountered some like that?

Others have reported making Eternity work by removing their account and re-adding it.

[-] Rez@sh.itjust.works 5 points 8 months ago

Thanks, that seems to have fixed it!

[-] TacoButtPlug@sh.itjust.works 5 points 8 months ago

Thank you!!!

[-] can@sh.itjust.works 5 points 8 months ago
[-] Rooki@lemmy.world 5 points 8 months ago

Lets go! Congrats on the upgrade of the hardware!

[-] email@sh.itjust.works 5 points 8 months ago

So how much do you pay for the server?

[-] Reverendender@sh.itjust.works 5 points 8 months ago

How can I help, my friend?

[-] LazerFX@sh.itjust.works 5 points 8 months ago

Good luck with the update in (if I'm right in the timezone calculation) a couple of hours...

[-] mikey@sh.itjust.works 5 points 8 months ago

Good luck, Dude! I'm sooo looking forward to seeing what I previously upvoted.

[-] CH3DD4R_G0BL1N@sh.itjust.works 4 points 8 months ago

How does one go about the blocking whole instances in 19.3?

[-] imaqtpie@sh.itjust.works 7 points 8 months ago

Profile > settings > blocks

Be aware that this will only block communities of that instance from your feed. You'll still see the users from the blocked instance posting in other communities.

load more comments (1 replies)
[-] can@sh.itjust.works 4 points 8 months ago* (last edited 8 months ago)

I know Scaled isn't selectable in Sync so you have to set it as default in Lemmy settings to use it. Does anyone know what other new features have no/limited compatibility with Sync? Or any other app for that matter?

Edit: I already had the sort for subscribed and everything overridden so I had to figure out how to clear that (since scaled isn't an option when I try to change the override) but now it's good.

The trick is to hit the correct cancel btw 🙄

[-] brbposting@sh.itjust.works 4 points 8 months ago

Great work Dude!

Looks like pict-rs uploads by my account from today are working, still waiting on pictures from a few days ago and beyond. (Well prioritized, in that case.)

Thank you!

load more comments (8 replies)
load more comments
view more: ‹ prev next ›
this post was submitted on 23 Feb 2024
557 points (97.8% liked)

sh.itjust.works Main Community

7585 readers
2 users here now

Home of the sh.itjust.works instance.

Matrix

founded 1 year ago
MODERATORS