1625

Why does every small appliance or useful home electronics item have the BRIGHTEST LEDs in them?

I bought a new fan for our bedroom Sunday. It has 4 speed settings, and LEDs to display which setting you're on.

Just like every other electrical device in our bedroom, I had to cover the LEDs with electrical tape because they are TOO DAMM BRIGHT. That one light was more than bright enough for me to see in the room with all the lights off.

I can't sleep well if there's a lot of light like that, especially blue light, and it's like every fucking electronics manufacturer used the same extra bright blue LEDs.

All of our power strips have them. Same brightness.

The fans have them.

Don't even get me started on digital clocks and the plague of bright LEDs that they bring about

Many charging plugs have them built into the plug itself.

Even some fucking light switches have them now!

I have about 6 different things in our bedroom that have electrical tape over their completely unnecessary LEDs.

Why has this become such a common thing? Is this really something most people want? To have a room that is never actually dark even with the lights turned off?

(page 3) 50 comments
sorted by: hot top controversial new old
[-] EntropicNinja@lemmy.world 9 points 1 year ago* (last edited 1 year ago)

It's so "Big Brother" can still watch you....?! 😅

Bluetack is your friend. The constant red light on our baby monitor was too distracting in the pitch blackness of the night that it kept my kids awake. A small amount of Bluetack and this problem is solved. Not asthectically pleasing but a good option.

[-] vaxcruor@lemmy.world 9 points 1 year ago

I got really annoyed with all of the ones on my devices and finally find something that works, LED light blocking stickers and dimming stickers. The dimming ones are useful to reduce the brightness of you still need to see if something is on.

My biggest complaint about lights at night is my CPAP machine with its screen, indicator light, start stop button light and light on the control knob. The bloody thing is for helping me sleep and lights up the room. Currently I'm designing on a 3d printed cover for it ATM.

load more comments (1 replies)
[-] eva_sieve@lemmy.world 9 points 1 year ago

sorry, it's the future, these are apparently mandatory now.

[-] CCF_100@sh.itjust.works 9 points 1 year ago

Oh my gosh, yes, this drives me absolutely insane. Appliances should either turn their LEDs off after a few seconds, or not use them at all.

[-] ofk12@lemmy.world 9 points 1 year ago

Absolutely boils my piss because it's so unnecessary

[-] reedthompson@reddthat.com 9 points 1 year ago

My home office is in my bedroom. I've covered what I can with electrical tape but the glow still comes through. Sometimes I just throw dirty t-shirts and socks over things

load more comments (1 replies)
[-] Pazintach@lemmy.world 9 points 1 year ago* (last edited 1 year ago)

To find a computer part that doesn't come with lights on it is getting harder. Even parts buried within the case have lights. How I want to destroy those LED lights on my motherboard.

load more comments (4 replies)
[-] Nugget@lemmy.world 9 points 1 year ago

If you're ever buying your own LEDs, make sure they're 2700K or less, it makes a huge difference in the temperature of light. The annoying part is that manufacturers ship appliances with god awful lightbulbs which, thanks to unfortunate advances, mean they will never die. A blessing and a curse.

[-] CryptoKitten@lemmy.ml 9 points 1 year ago

I miss having a LED on n'y phone.

load more comments (3 replies)
[-] Willer@lemmy.world 8 points 1 year ago

fun fact: human eyes can actually perceive single photons.

also fun fact: we can shoot single photons.

load more comments (6 replies)
[-] DragonAce@lemmy.world 8 points 1 year ago

I keep a roll of black tape in my bedroom for this exact reason. I have a damned humidifier that has a light under the water tank so the whole thing glows. Who TF designs this crap?

[-] BarelyAdulting@midwest.social 8 points 1 year ago

I stayed in a motel recently that had a kitchenette with a mini fridge in the same room as the bed. You can tell management spent extra for this fridge too, since it had a temperature readout and a see-through door. But by god, that bright blue LED temperature display lit up the entire room and kept me up all night. I tried to cover it with some paper, but that only made it spread further. A couple socks draped over the top eventually did the trick.

[-] pleaseBeChicken@lemmy.world 8 points 1 year ago

Goes with nothing ever turning off any more. If it all shut off, no lights.

load more comments (1 replies)
[-] Hurtreynolds90@sopuli.xyz 8 points 1 year ago

I appreciate this sentiment, but I kinda dig the LEDs. We just ordered bookshelves that have them installed, and I'm kinda giddy about reading books while be illuminated from the home of the books, lol.

I'm an excessive kinda guy.

[-] j3rderer@programming.dev 8 points 1 year ago

Depending on the device I use electrical tape or the liquid electrical tape. It works quite well at blocking the light.

load more comments (1 replies)
[-] jtskywalker@lemmy.world 8 points 1 year ago

I got rid of my alarm clock because the led screen was too bright. My phone charger has a bright blue light on it so I have to cover that up to sleep. I almost want to set up my bedroom with no electronics at all but I don't think my wife would go for it

[-] Wahots@pawb.social 8 points 1 year ago

Thank you!! I thought I was the only one. All my new power strips I just bought have a full brightness blue or green standard LED. Like the ones that come in cheap headlamps. It creates a column of blue or green light on the ceiling. I taped over all of them. My new heatpump unit also has a bunch, but mercifully has an "off" button that will just display the Leds for a second when adjusting the temperature or fan, then turns them back off. It also remembers this setting between power cycles. Total breath of fresh air compared to my new (annoying) tea pot that has permanently on LEDs, or my air purifier which also does unless you want it in sleep mode which essentially is the same as turning off the machine.

The sad part is that a lot of my old devices didn't have LEDs, but broke over the years and aren't repairable. And most new ones have chips and LEDs now to be with the times. Makes them more expensive and generally less reliable.

[-] Giu176@lemmy.world 8 points 1 year ago

I feel you man. My mom lived in a house that was build in 2010 and had touch-futuristic-smart-glow-in-the-dark light switches.. They had a bright blue LED in the middle, it drove me crazy. The switches were also packed in groups of two or three.

load more comments (1 replies)
[-] qaz@lemmy.world 8 points 1 year ago

I always cover or unplug my printer before going to bed because otherwise the little screen will start flashing every 15 minutes.

[-] corsicanguppy@lemmy.ml 8 points 1 year ago

There's a lot of value in a sleeping area that can get really really dark.

I'm ever so grateful for electrical tape.

[-] systemglitch@lemmy.world 7 points 1 year ago

I do the same thing my man. Your pain is my pain... fuck those LEDs.

[-] stopthatgirl7@kbin.social 7 points 1 year ago

Blue LEDs can trigger migraines in us poor saps who are photosensitive, so them being all over the place has been a ton of fun, let me tell you.

I got reddish-brown tints for my glasses and it’s been a lifesaver.

load more comments (1 replies)
[-] lagomorphlecture@lemm.ee 7 points 1 year ago

I work from home in my room and I know the struggle. I have electrical tape over several useless LEDs on my office equipment.

[-] RedSeries@lemmy.world 7 points 1 year ago

Bright LEDs suck. I've used painters tape before to cover some of the LEDs I've got around the house, and it works pretty alright. It's thin enough to show the light but dim it pretty significantly.

load more comments (1 replies)
[-] dudebro@lemmy.world 7 points 1 year ago
load more comments (2 replies)
[-] over_clox@lemmy.world 7 points 1 year ago

Back in 2011, I picked up and repaired a busted USB-SATA HDD adapter, and it had the most blinding bright white status light on it.

What did I do? I literally cut that end of the board off with a hacksaw (then carefully filed away stray copper to avoid any shorts). Then I installed a 12 volt receptacle and 16v filter capacitor in its place to be able to power up desktop drives if I want.

Screw them blinding lights though! 👍

[-] Madison_rogue@kbin.social 7 points 1 year ago

LED and face mask manufacturers have conspired to improve sales of both appliance lighting, and sleepwear.

load more comments
view more: ‹ prev next ›
this post was submitted on 11 Jul 2023
1625 points (98.5% liked)

Mildly Infuriating

35457 readers
31 users here now

Home to all things "Mildly Infuriating" Not infuriating, not enraging. Mildly Infuriating. All posts should reflect that.

I want my day mildly ruined, not completely ruined. Please remember to refrain from reposting old content. If you post a post from reddit it is good practice to include a link and credit the OP. I'm not about stealing content!

It's just good to get something in this website for casual viewing whilst refreshing original content is added overtime.


Rules:

1. Be Respectful


Refrain from using harmful language pertaining to a protected characteristic: e.g. race, gender, sexuality, disability or religion.

Refrain from being argumentative when responding or commenting to posts/replies. Personal attacks are not welcome here.

...


2. No Illegal Content


Content that violates the law. Any post/comment found to be in breach of common law will be removed and given to the authorities if required.

That means: -No promoting violence/threats against any individuals

-No CSA content or Revenge Porn

-No sharing private/personal information (Doxxing)

...


3. No Spam


Posting the same post, no matter the intent is against the rules.

-If you have posted content, please refrain from re-posting said content within this community.

-Do not spam posts with intent to harass, annoy, bully, advertise, scam or harm this community.

-No posting Scams/Advertisements/Phishing Links/IP Grabbers

-No Bots, Bots will be banned from the community.

...


4. No Porn/ExplicitContent


-Do not post explicit content. Lemmy.World is not the instance for NSFW content.

-Do not post Gore or Shock Content.

...


5. No Enciting Harassment,Brigading, Doxxing or Witch Hunts


-Do not Brigade other Communities

-No calls to action against other communities/users within Lemmy or outside of Lemmy.

-No Witch Hunts against users/communities.

-No content that harasses members within or outside of the community.

...


6. NSFW should be behind NSFW tags.


-Content that is NSFW should be behind NSFW tags.

-Content that might be distressing should be kept behind NSFW tags.

...


7. Content should match the theme of this community.


-Content should be Mildly infuriating.

-At this time we permit content that is infuriating until an infuriating community is made available.

...


8. Reposting of Reddit content is permitted, try to credit the OC.


-Please consider crediting the OC when reposting content. A name of the user or a link to the original post is sufficient.

...

...


Also check out:

Partnered Communities:

1.Lemmy Review

2.Lemmy Be Wholesome

3.Lemmy Shitpost

4.No Stupid Questions

5.You Should Know

6.Credible Defense


Reach out to LillianVS for inclusion on the sidebar.

All communities included on the sidebar are to be made in compliance with the instance rules.

founded 1 year ago
MODERATORS