69
submitted 8 months ago by alyaza@beehaw.org to c/science@beehaw.org
top 16 comments
sorted by: hot top controversial new old
[-] hglman@lemmy.ml 23 points 8 months ago* (last edited 8 months ago)
[-] NaibofTabr@infosec.pub 21 points 8 months ago

Graphene is an amazing material. It can do anything and everything... except leave the lab.

Lmao too true

The last thing I heard that about was aerogel.

Unless I've missed something, nothing's changed!

[-] GreyEyedGhost@lemmy.ca 9 points 8 months ago

It took me about a minute to find this: graphene aerogel for sale.

[-] onlinepersona@programming.dev 2 points 8 months ago

I'll say the same thing I said in another comment. It took 15+ years for "5nm" chips to be produced. China just made some last year which is a development the West thought incredibly fast.

I think most of us are ignorant to just how far behind consumer electronics are to things happening in the lab. Maybe in 15 years graphene chips will be all the rage.

CC BY-NC-SA 4.0

[-] StereoTypo@beehaw.org 8 points 8 months ago

"It is chemically, mechanically and thermally robust and can be patterned and seamlessly connected to semimetallic epigraphene using conventional semiconductor fabrication techniques."

Sounds promising.

Can someone explain the implications of the bandgap and room temperature mobility values for future chip designs?

[-] OmnipotentEntity@beehaw.org 4 points 8 months ago

My possibly wrong, not researched, and half remembered from college first impressions are: the band gap is lower than Silicon, so it might not be appropriate in room temperature applications/very small gate sizes due to dark current. But the mobility is very high, meaning lower voltage gates might be possible, or higher switching speed/lower latency gates.

[-] jarfil@beehaw.org 4 points 8 months ago* (last edited 8 months ago)

Half the band gap of silicon, 10 times the mobility, at room temperature... sounds like it would be able to switch up to 20 times faster in the same conditions.

I can't read the full paper, but what I'd wonder is how those values change with temperature:

(https://www.researchgate.net/figure/Energy-band-gap-temperature-dependence-of-GaAs-Si-and-Ge_fig1_305731183)

0.6eV at 300K is similar to Germanium, which has slightly lower mobility but has been successfully used in semiconductors. If graphene has a better dimensional stability (as in, doesn't grow random dendrites over time), then it could be a decent improvement.

[-] skillissuer@discuss.tchncs.de 1 points 8 months ago

wait, last time i've checked if you want fast switching, faster than silicon can get you, you use GaN, and it has 3.4eV band gap. how does it work?

[-] jarfil@beehaw.org 1 points 8 months ago* (last edited 8 months ago)

As far as I understand (I haven't had much experience with high frequencies), it depends on the amount of energy you are willing to push.

Smaller band gap and higher mobility, means less energy needed to switch, but also higher sensitivity to random noise. If you want to "transmit" a high frequency signal, you want a larger signal eye, which for a single signal, you can do by increasing the energy. However, if you want a few billion transistors, each one with "its own signal", then you want to reduce energy usage first, think about ways to shield them from the noise later.

For reference, a modern CPU running at 0.6V with a 50W TDP, means it potentially could be pulling up to 80A internally. Reducing that by half, would directly allow 4 times more simultaneously active transistors at the same TDP. Having them switch 20 times faster, if you managed to deal with the noise, it would pave the way to 80 times faster multiprocessors for a similar power budget.

The good news is, if they use less energy, then they also emit less noise, which decays with the square of the distance. So half the emitted noise, even with twice the noise susceptibility, could let you pack them twice as close, meaning 4x as many per area, or 8x as many per volume.

[-] skillissuer@discuss.tchncs.de 1 points 8 months ago

if anything SiC support is as stiff as they come

[-] Numpty@lemmy.ca 6 points 8 months ago

Hmmm.... Infineon has been doing work with graphene semiconductors for years. Something seems a bit off with this article.

[-] gregorum@lemm.ee 6 points 8 months ago

And just like everything graphene, it’ll take 10 years before they can manufacture it at scale, and the cost will be outrageous. 

Still, pretty cool.

[-] onlinepersona@programming.dev 1 points 8 months ago

So what? It took 15+ years for "5nm" chips to be produced. China just made some last year which is a development the West thought incredibly fast.

I think most of us are ignorant to just how far behind consumer electronics are to things happening in the lab. Maybe in 15 years graphene chips will be all the rage.

CC BY-NC-SA 4.0

[-] Powderhorn@beehaw.org 5 points 8 months ago

As soon as we have this commercialized, fusion is just around the corner.

[-] sknowmads@dormi.zone 2 points 8 months ago

Quite the leap, eh?

this post was submitted on 03 Jan 2024
69 points (100.0% liked)

Science

12941 readers
75 users here now

Studies, research findings, and interesting tidbits from the ever-expanding scientific world.

Subcommunities on Beehaw:


Be sure to also check out these other Fediverse science communities:


This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago
MODERATORS