3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
An average speed of 300mm per second on every axis? Including acceleration and cornering? How fast are you printing? 1000mm/s?
You might be a factor of 10 off here…
Printers are pushing significantly faster acceleration these days with upto 50k mm^2/s and 1m/s is already real.
Which hotend do you use to push >100 mm^3/s?
Lets be real here, a bambulab x1c which is currently considered high speed for >95% of users (which you are asking for here), has a maximum flow rate of 22 mm^3/s which limits it to about 250mm/s for 0.2mm layer height.
Divide the number by 5 which would be roughly every 100 print hour or two weeks of printing.