106
I hate how disposable smartphones are
(hexbear.net)
Chat is a text only community for casual conversation, please keep shitposting to the absolute minimum. This is intended to be a separate space from c/chapotraphouse or the daily megathread. Chat does this by being a long-form community where topics will remain from day to day unlike the megathread, and it is distinct from c/chapotraphouse in that we ask you to engage in this community in a genuine way. Please keep shitposting, bits, and irony to a minimum.
As with all communities posts need to abide by the code of conduct, additionally moderators will remove any posts or comments deemed to be inappropriate.
Thank you and happy chatting!
Oh yeah, and if you’re new to soldering, practice first and use a heat sink between the joint and the plastic that little metal hook goes into.
An appropriate heat sink might be as simple as some needle nose pliers with rubber bands around the handles clamped up close to the body of the inlet.
That design of inlet can take some real heat to start wicking and without a heatsink it may melt the plastic around the barrel.
that sucks, but at least it's through hole. looking at the hardware maintenance manual i'd take the board out before i tried to replace it.
from the picture you posted, make sure you use flux, solder wick and alcohol to clean up the area before you try to solder in the replacement. cleaning up other peoples work is a real pain sometimes.
the screw sizes are listed in that manual, they all seem to be m2 or m3 of various lengths, so you ought to have an easy time finding them. just make sure the screw head profile is the same.