3DPrinting

19897 readers

27 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

FYI (opinion.) don't buy an MMU (sopuli.xyz)

submitted 1 week ago by elucubra@sopuli.xyz to c/3dprinting@lemmy.world

28 comments fedilink hide all child comments

Most of the multi color printers out there are AMS/MMU or similar, and there are many DIY options, like Armored Turtle or ECF.

They are an evolutionary dead end. Slow, wasteful, expensive to run.

The Prusa XL, or the Snapmaker U1 are the future direction.

Also a good CoreXY machine like vorons/sovols/ratrigs/VZ, etc can be upgraded with the Bondtech INDX tool changer.

We are talking 5x lower print times, 5x lower material costs.

There is going to be a glut of used Bambus and other multi material unit printers, when print farms unload them, since the tool changers will massively boost their bottom line.

Comments?

you are viewing a single comment's thread
view the rest of the comments

[–] batmaniam@lemmy.world 1 points 1 week ago

So I have a FlashForge AD5X with the MMU. It worked amazing out of the box, including flawlessly doing some TPU. They actually mentioned the MMU was designed with TPU in mind. That being said: I have been struggling with basic PLA, even after swapping to nozzle that has run only PLA (even though I only ran <10g of TPU through it). I am still new to a lot of this, and don't feel experienced enough to fault the hardware. What I can say though is it does seem folks are specifically improving the ability of MMUs to handle flexibles. A big reason I got it was to be able to do ABS parts with TPU gaskets. Ask me in a few months.