this post was submitted on 06 Jul 2025
22 points (95.8% liked)
3DPrinting
19047 readers
20 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at:
or !functionalprint@fedia.io
There are CAD communities available at:
!cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 2 years ago
MODERATORS
Under Quality -- Layer Height -- First Layer Height. Adjust the layer height as needed. Generally speaking, your first layer should be no less than half the nozzle diameter. So, a .40mm nozzle first layer height should be .20mm. Thought for larger beds, you may wish to increase the first layer height a bit to help with bed adhesion over a wide area.
My first inclination is to got to Quality -- Walls and surfaces -- Avoid Crossing walls and check that box. See what happens when you print your Benchy.
If you still have issues, go to you filament settings for the filament you are printing with, (the little pencil to the right of the filament box), make sure you have the Advanced slider on, click on the Settings Overrides tab and check the Length, Z-hop height, On surfaces, (select All Surfaces in the drop down box to the right), Retraction speed, (the default is fine), the De-retraction speed, (set to zero), Travel Distance threshold, Retract on layer change, Wipe while retracting, and wipe distance.
This is a start.