3DPrinting

18852 readers

172 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

Prints keep failing. (lemmy.world)

submitted 1 day ago by mineralfellow@lemmy.world to c/3dprinting@lemmy.world

13 comments fedilink hide all child comments

I have been using my Bambu A1 mini for the last several months without major issue, but suddenly I can't get anything to print. Even a benchy detaches before finishing.

I have scrubbed the plate with a fresh sponge, soap and water. I kept my filament in a dehydrator for a couple of days, then immediately tried to print.

There is a local problem, where an illegal landfill caught fire, and it can't be put out. I smell burning rubber all the time. Could that be the cause of the print failure? What else can I do?

you are viewing a single comment's thread
view the rest of the comments

[–] mineralfellow@lemmy.world 2 points 1 day ago (1 children)

Ok, I am having trouble uploading the video. Anyway, all of the prints will be fine up to a point, then detach. The nozzle is colliding with the models. In some cases, I can see the model being pushed down on one side or other by the nozzle before it detaches.

[–] maxwells_daemon@lemmy.world 2 points 1 day ago

Yeah, if the nozzle is hitting the part, then it's very likely a cooling issue. If an steep overhang isn't cooled properly, it'll curl upwards.

Either you're printing too hot, or the fan is too slow or failing. For PLA, you can leave the fan at 100% after the first or second layer, and print between 195 and 205°C. Printing too fast also means the fan may struggle with the amount of hot plastic.

Can you paste your slicer settings?