view the rest of the comments
3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)
Moderation policy: Light, mostly invisible
The Prusa is what you want; it works straight out of the box and requires basically no tinkering. It’s just not at the price point you’re looking for. Given that, I would go with the Ender 3 v2. It’s a great printer, but you do have to assemble it first. It’s easy enough to do, mine had good instructions with it.
For a print surface, I live in an extremely dry climate and had a hell of a time getting anything to stick to the bed until I switched to a PEI sheet. It’s a textured, magnetic, metal sheet coated in PEI. It’s nice because it magnetically sticks to the printer and you can peel it off and flex it to pop off your prints. That single issue was pretty much the only issue I’ve had with my Ender 3 v2. Very little tinkering. It’s a great printer at a great price point. But you do have to put it together first.
I’ve thought about getting a BLtouch or something similar, but I just don’t have to really level the bed very often. The only times I do re-level it are when I occasionally have to pick up and move my printer.
I also have never used an enclosure, but I only print with PLA. As others have mentioned, there are other materials you can print with that create toxic fumes that you would want to vent outside. In that case, you would enclose it. They could also reduce noise, but that’s never been an issue for me.
I would also recommend sticking to PLA filament at first because it’s easy to print with and sticking to one material means you don’t have to change any print settings.
tl;dr The Ender is a great choice, unless you want to increase your budget and buy a Prusa.
I can 100% recommend prusa, I've got a mini and it really does just work. Maybe every month or so I'll have to disassemble the extruder because of a filament jam, but that was fixed by upgrading the extruder, and also took like maybe 30 seconds.
Have you tried wiping your old build plate (guessing it's the standard ender one) with isopropyl alcohol? That's a must before first use and every once in a while if the bed gets too greasy and dirty.
Yeah, I appreciate the suggestion, but I’ve tried every trick in the book and turned in all the settings. I had a pretty extensive thread on Reddit where people were trying to help me figure it out. In the end I just switched to a PEI plate and it instantly solved all my adhesion problems. Which is fine because I like the texture it puts on my builds anyway.
Just curious, did you try the isopropyl alcohol trick?
Yeah, a PEI plate is totally fine as well.
I did but with no luck.
I'm on a bit of a war path against these Creality recommendations. I got a CR-10, and their software is AWFUL. I don't know if that's a universal thing, but I've never seen a product that's as poorly translated, hackishly constructed (the touch screen isn't even secure, it just hangs there off some screws, and the diagonal supports aren't even properly sized pieces, they just basically made a giant bolt that's split in the middle and said "do it yourself"), with such horrid software (the damn thing can't even connect to WiFi properly or use a freaking Ethernet connection properly), and worst of all, even if you get past all that other stuff it's extremely unreliable at its most basic function, printing (I've still yet to get the dang thing to print something without the print detaching from the base).
Creality is junk, I can only assume Prusa is better because the bar is so low; literally the worst product I've bought in years.
This is very different than my experience with Creality, with the exception of having a hard time getting prints to stick. And as I said, that issue was solved by simply getting a PEI plate. I also have a few other friends and family who have Creality printers and I haven’t heard any bad stories. Maybe it’s that model?
Others commented also in this vein - apparently it is very much hit or miss. With luck it's a decent unit, no luck with and it's a unit like yours. That variation alone is enough to turn me off.
I got an old cr-10 from a friend, and yes, the software and screen have their issues. But, the thing is a workhorse. At one point I had it working almost non stop, creating thousands of prints, and it handled it like a champ. This is an old printer... I don't know how things have changed since, but I wouldn't blanket discount Creality. I'll say this: based on my somewhat limited experience, any printer will work great out of the box. It's keeping it that way that becomes challenging over time.
If any printer will work great out of the box, any printer is not Creality, because it certainly hasn't ever worked great.