hey guys,

i have an old pc running truenas scale and a jellyfin app/docker at home. And i have recently replaced my router. Due to this, the IP adress of my truenass install changed, and i’m fine with that. But the Jellyfin docker tries to start up, but there’s only a couple lines in the shell:

„WARNING: Your user does not have sudo privileges so /usr/local/bin/k3s command will run on your behalf. This might cause permission issues.

Error from server: error dialing backend: x509: certificate is valid for 127.0.0.1, 0.0.0.0, 192.168.50.9, not 192.168.178.38“

the second line is what really concerns me. It seems that jellyfin is trying to use its old IP adress, but Truenas is telling it it can’t. I cannot interact with the docker through truenas’ shell and i am by no means an expert on linux-based stuff.

Is there a way to point it to its new IP adress, or am i better off making a new jellyfin install. I’d like to avoid the latter, because last time it took at least 5 hours to et it up and scann all of the files.

if you have a community that this post would fit better in, feel free to tell me.

Thanks for your help in advance!

hey guys,

i have an old pc running truenas scale and a jellyfin app/docker at home. And i have recently replaced my router. Due to this, the IP adress of my truenass install changed, and i’m fine with that. But the Jellyfin docker tries to start up, but there’s only a couple lines in the shell:

„WARNING: Your user does not have sudo privileges so /usr/local/bin/k3s command will run on your behalf. This might cause permission issues.

Error from server: error dialing backend: x509: certificate is valid for 127.0.0.1, 0.0.0.0, 192.168.50.9, not 192.168.178.38“

the second line is what really concerns me. It seems that jellyfin is trying to use its old IP adress, but Truenas is telling it it can’t. I cannot interact with the docker through truenas’ shell and i am by no means an expert on linux-based stuff.

Is there a way to point it to its new IP adress, or am i better off making a new jellyfin install. I’d like to avoid the latter, because last time it took at least 5 hours to et it up and scann all of the files.

if you have a community that this post would fit better in, feel free to tell me.

Thanks for your help in advance!

Hi,

i've been running a Truenas server for a while now. i currently have my totally legally aquired movie saved on there and jellyfin to stream them.

but the one complaint is: i can't torrent without my Workstation pc running, because its running qbittorrent and uploading it through SMB.

is there any way to install a torrent program on the server and remote control it via my PC? Ideally with magnet link support?

i would imagine it being done via a VM and connecting it to the server via SMB or FTP as well

my electronics engineer brain also had the idea to buy a passively cooled thinkcentre for 50€ on ebay and just keep it running inside my office 24/7.

any help is appreciated!

The list of components i've compiled is as follows:

-A corsair 4000D airflow case -Ryzen 5 3600 (might be a slight bottleneck, but i have a 3900X, which is basically the same but double the cores and it barely gets any load during gaming) -BeQuiet Pure Rock 2 cooler -Corsair Vengeance LPX DDR4 2x8gb 3600mhz -BeQuiet System Power 9 CM 600W -ASUS Prime B550-M A -3060 TI, manufacturer doesn't really matter -2TB M.2 PCIe 4.0 SSD (haven't decided on a manufacturer yet, but likely to be crucial, corsair or WD)

for context, she's going to be using a 1440p 144hz monitor and she's planning to play games like Warzone or some of the newer CoD games

i have built multiple PCs roughly in this region of performance before, and they've run great so far.

appreciate any suggestions!

First things first, the setup is currently up and running. but i would like to modify it to use a reverse proxy through my personal domain.

Currently, i'm using an old pc with Truenas and a jail with jellyfin in it. i'm connecting to it with the free Fritz!Box VPN service.

but that's stupid and slow. so i've bought a domain at godaddy.com. but i don't understand the principle of whatever is managing the domain knowing the public IP-adress of my server. i've heard of Caddy, but it's also running locally, so i don't understand how i connect the pc to the domain.

if anyone could simplify this down for me, it'd be very helpful.