206
New Forklift [Rule]
(files.catbox.moe)
Sweet 'lift bro
Is it pro-pane?
All our lifts run propane
I wish we'd switch to electric but that's not in the plans anytime soon
They were diesel when I was driving them, fucking horrible!
Gas ones were a godsend!
Our shop still has a diesel lift and they have a forklift that was converted from diesel to propane
That diesel lift is shite
It's a tank but God damn is it stubborn
I can't believe OP is actually forklift certified
Not only am I forklift certified I'm also one of the mentors certifying people and the sole forklift inspector at my work inspecting roughly 80 forklifts everyday.
It's pretty great NGL
You can inspect 80 forklifts in a day? That's 10 every hour in an eight hour shift. That's 7.5 minutes a forklift every day all day.
Including prestart paperwork? Oil levels, belt conditions, operational check of each one and all the functions?
Boeing makes forklifts now, didn't you know?
Given the quality of the forklifts we have they definitely weren't built with such quality lol
Pretty much all the new lifts we got have all had little things that QA should have caught before they shipped. Bolts falling off, leaks that shouldn't be there, wiring issues, crossed hydraulic lines that result in inverted controls, etc.
It's pretty silly
crossed hydraulic lines that result in inverted controls
I'm not really familiar with those products, but that's the kind of thing where, unless you found it in a ditch somewhere, or bought it at a charity, it should go right back to the manufacturer. Then the manufacturer should go right on that big poster on the wall. The one that says "don't ever buy from those guys".
You'd think so but the bosses were like, "Well do they still work?"
And then kept the lifts
Apparently due to it though they reimbursed us the cost of fixing that but honestly I agree with you
If they missed something that obvious what the fuck else did they miss that's less obvious‽
Oh, right, I forgot you're in the US. You are in the US? Or are there other such places I ought to know of?
Yep I'm in the US
It's actually a little less time than that as I get 2 15 minute breaks during that 8 hours.
Checking the oil, coolant, hydraulic fluid, and the radiator for debris takes about 30 seconds. Add an extra few seconds to check the belt tension using the little jig I made and you get the hard part done in less than a minute. Most of the time saving here is from how I park the lifts and how I plot my path through them.
Checking the hydraulics for proper movement is fairly short as well and during that you can check the horn and lights.
The parking brake gets checked when you try to move the lift and so are the reverse alarms and reverse lights.
Checking the tank presence sensor is done on approach to the lift by disconnecting the tank latch before hopping on and attempting to start the lift, if it properly detects the disconnected latch it won't start.
Tire wear is checked on approach as well due to having a line painted on my boot that is just over an inch off the ground (if the tires have less tread than that they need new tires)
Checking for leaks is fairly quick as well as it's basically looking for wet spots on the lines and dots on the ground.
Logging the hours is done typically while the lifts auxiliary systems (that we add) are starting up.
The paperwork takes awhile though NGL
So in general I can get through all the lifts in about 5.5 hours and the paperwork takes the rest of my shift.
That sounds stressful. Do you need to check this many or do you just do it because you're fast enough.
It can be pretty stressful at times but in general it's actually pretty chill. I don't have to worry about other people driving around me, I don't have to worry about hazardous materials, and I get to avoid one of my supervisors who has a skill of making everyone around them more stressed.
Especially considering the paperwork takes the rest of my shift regardless of how long the inspections take 😉
Unfortunately I do need to check all of them everyday. There's only a 6 hour gap between shifts where I work so I need to finish all of them in that time. And during the 18 hours the forklifts are in motion they're redlining the engines and doing 8mph. So basically each forklift drives about 150 miles a night.
I...I...I...UH
The smoothness of a new lift can't be understated vs a lift that has 10k+ hours of drive time on it
Last time we got a new reach truck at my job the first night I tripled the travel distance on the display.
This one in particular had a hydraulic leak straight from the factory but when it came back from our shop it broke a hundred hours before the week was out
Drive safely!
https://www.youtube.com/watch?v=TJYOkZz6Dck
Didn't even have to click to know you linked Forklift Driver Klaus
This is literally one of the videos that my mentor showed me when I got trained
It wasn't in the official training docket but he felt it was necessary to show
And when I used to do training I also made sure to show it to people
Now though due to the inspections I do they don't let me train people and unfortunately it shows with how the new people work
They don't take safety as seriously as they should
Here is an alternative Piped link(s):
https://www.piped.video/watch?v=TJYOkZz6Dck
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source; check me out at GitHub.
Why can't all induction videos be like this.
They played it when I got my ticket.
Looks a lot like the Unicarrier I drive every night.
Enjoy it while it lasts, the paint will be chipped in a day.
Oh our lifts get chipped hella fast
I've been working at this location for almost a decade now and this is the third wave of new forklifts that has happened in that time
Does this one come with heated seats?
Naw our lifts are pretty basic
Lift a crate of forks to be literal?
I am so jelly
They run like silk, well the one's that weren't fucked from the factory lol
this post was submitted on 18 Apr 2024
206 points (100.0% liked)
196
16419 readers
1881 users here now
Be sure to follow the rule before you head out.
Rule: You must post before you leave.
founded 1 year ago
MODERATORS