1108
Keep it simple (lemmy.world)
(page 2) 50 comments
sorted by: hot top controversial new old
[-] Gestrid@lemmy.ca 2 points 2 days ago

Given the choice, I'd definitely choose a cable for anything I know will require high internet usage. Wireless is just too slow, even on a 5G connection.

I still remember I once broke my Windows installation (young me had tried dual-booting the Windows 10 beta and my Windows 7 installation). I had to get system restored discs from the manufacturer. It wasn't particularly tricky to fix, but it took a long time to download those Windows updates after it finished. I noticed an immediate change once I remembered I had an old 30 ft. ethernet cable lying around and plugged it in. (This was maybe 8-10 years ago.)

[-] Subverb@lemmy.world 1 points 2 days ago

I'm a cable guy too; it's just better. But you can't get quality CAT6 or better cables for $6.99 anymore.

[-] icecreamtaco@lemmy.world 4 points 3 days ago* (last edited 3 days ago)

Who buys a $300 home wifi box? They're $50-100

[-] Racle@sopuli.xyz 1 points 2 days ago

Depends on usage. If you don't need super fast speeds or low latency, go for cheaper model.

If you need low latency and high speeds (ex. Wireless VR with PC), you need to pay more to get good and stable connection (+ multiple routers as mesh if needed). And more expensive devices have different CPU/RAM which will help you if you have large network + extra security features on.

[-] nonentity@sh.itjust.works 11 points 4 days ago

Wireless data links should be the exclusive domain of temporary, nomadic and/or sacrificial applications.

If the channel is permanent, static, or critical; as much of the path as practicable should be provisioned with constrained energy transmission.

load more comments (1 replies)
[-] cmhe@lemmy.world 8 points 3 days ago

I spend a lot more money on good Ethernet switches. But at least that works and is easier to manage than Wifi.

load more comments (9 replies)
[-] Malfeasant@lemm.ee 4 points 3 days ago

I set up a mesh router pair a while back - super easy setup, and the speed is good enough to have multiple TVs streaming at once, and without needing to run cables between rooms... Worth it.

load more comments (8 replies)
[-] Jimmycakes@lemmy.world 4 points 3 days ago

That one in the picture is $599 isn't it?

[-] Im_old@lemmy.world 13 points 4 days ago

I'm seriously thinking of getting a usbC-ethernet dongle for my mobile, for when I'm at my desk.

load more comments (11 replies)
[-] jaschen@lemm.ee 6 points 3 days ago

I got a used 10Gbe switch and a thunderbolt 10Gbe adapter for my computer and now I can transfer my videos and photos from my NAS like it's my internal hard drives.

It can also do 2.5Gbe which pretty much future proofs me.

[-] nimble@lemmy.blahaj.zone 9 points 4 days ago

6.99 is just one cost though. If you're needing ethernet actually done in walls then you're going to be paying a lot more than an access point.

[-] IsThisAnAI@lemmy.world 9 points 4 days ago

Unless you need 6ft of cable or you just run wires on the floor it's more like $200 of plenium rated cable, and keystone jacks and the labor involved with the run.

My house with a half finished basement (easy access) took probably 16-20 hours running to 5 rooms.

[-] nimble@lemmy.blahaj.zone 6 points 4 days ago

Yeah when i did my house i was quoted $100-200 a drop and that was years ago. I bought materials for 20 drops for about 1k (cables, keystones, plates, cable tester, ethernet cutter, puncher, drywall knife, flex drill bit, wall fishing tape, network switch, and a bunch of other stuff im probably forgetting). It took me 1 hour per drop on average. Some were easy, some were a pain in the ass. Now you can save on materials slightly by doing 1 drop per room whereas i did individual drops for each jack (because i wanted full bandwidth on each line), but either way it is going to end up more costly than an access point or mesh system unless you're just running one line within the same room.

Definitely worth it if you care about the speed or reliability of your connection but i think for most people these days it's probably overkill.

If you do go wiring everything then now you're mostly already set up to do some Power-over-Ethernet (PoE) devices for cameras, access points etc. And next thing you know you're an amateur home networker!

[-] PeriodicallyPedantic@lemmy.ca 2 points 2 days ago* (last edited 2 days ago)

Honestly, my place isn't that big, but I can cover the whole place with a single wireless access point, and get fast, reliable, stable connection everywhere.

In the room with the AP (my home office and gaming PC) I have zero jitter, zero packet loss, and 2ms ping.

Wire hasn't been needed for a good connection for a long time

[-] Sabata11792@ani.social 9 points 4 days ago

But that cable can't summon Kel'Tuzad unlike the router.

[-] Dave@lemmy.nz 7 points 4 days ago

I have about 6 or 8 ethernet cables in use plus more in my spare cables box, and I don't remember ever paying for one. Where do they come from? I never seem to run out.

[-] Shardikprime@lemmy.world 8 points 4 days ago

Phased arrays are not a joke. You can get ridiculous dynamic range with those

load more comments
view more: ‹ prev next ›
this post was submitted on 18 Dec 2024
1108 points (98.6% liked)

memes

10547 readers
2116 users here now

Community rules

1. Be civilNo trolling, bigotry or other insulting / annoying behaviour

2. No politicsThis is non-politics community. For political memes please go to !politicalmemes@lemmy.world

3. No recent repostsCheck for reposts when posting a meme, you can only repost after 1 month

4. No botsNo bots without the express approval of the mods or the admins

5. No Spam/AdsNo advertisements or spam. This is an instance rule and the only way to live.

Sister communities

founded 2 years ago
MODERATORS