12
First layer woes - looking for advice
(lemmy.world)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 28 Jul 2023
12 points (100.0% liked)
3DPrinting
15276 readers
94 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
You can try a few things. Add a brim to the part in your slicer. Look at your first layer to make sure the nozzle isn't too far (you can find pics online for this).
And mostly importantly!! You might not believe this, but even if all of your settings are the same, you can get finger oils on the bed over time from grabbing prints. Wash the surface with soapy water and spray/wipe with rubbing alcohol between prints. Use a glue stick or hairspray if you're still having adhesion issues. Make sure that the bed is 60-70 and that the first layer of first few layers are slow. You want a good base, that will keep the part from detaching from the bed.
This. Finger oils are the enemy. If you've never washed the bed with soap and water, it usually fixes adhesion issues on a properly leveled machine.
ok ok, I'll put the old bed on after I wash it real good...I do this periodically but maybe I was eating chips or something.
Gahhhh same thing.... I'm on day 4 of this bs. I'm gonna throw my printer out a window
Glass is really hard to stick to. You've gotta get the z axis just right. I know it was working before but it happens. Don't give up but definitely take a break if you need. Highly recommend putting down some purple gluestick, it helps a ton. It isn't your fault if you've cleaned the bed, it's gonna take some patience. Maybe look into getting a PEI sheet if you don't have one? There happens to be a limited time deal on one your size (235x235mm, ender 3 v2 and aquila are the same) on amazon for $10: https://a.co/d/emfbtnc
Not a referral link or anything, but I really recommend one. They're usually around $15-20. I haven't touched my glass bed since I got one. Other than that honestly dude just go back when you've got more patience and download a bed leveling test print, and keep tweaking.
A little aqua net hairspray will do the trick too.
It looks like your Z offset is too high. I think you calculated in the wrong direction. Your Z offset should be so that if you go to Z 0 then your nozzle would just barely hit the bed.
Don't give up!