529
submitted 9 months ago by ylai@lemmy.ml to c/technology@lemmy.world
you are viewing a single comment's thread
view the rest of the comments
[-] pearsaltchocolatebar@discuss.online 39 points 9 months ago

I'm just now having to replace my brother printer (HL-2170W) I bought in 06, because the NIC is toast.

The printer still works great, but duplex printing sure would be nice.

[-] monkeyman512@lemmy.world 27 points 9 months ago

If it still has working USB you can hook it up to a $10 raspberry pi with wifi to act as a print server. I can understand if that's a more ambitious tech project than your ready to take on.

[-] user224@lemmy.sdf.org 7 points 9 months ago

There also used to be network printer adapters in the past. For example, the Belkin F8T030 Bluetooth AP. Yes, Bluetooth AP. I'd like something like that just for fun. Perhaps not this one specifically, as it only supports BT-LAP out-of-the-box and requires firmware upgrade for BT-PAN. Good luck finding firmware for a niche product from 2003.

But anyway, perhaps something like that (the printer part) is still made.

[-] LifeInOregon@lemmy.world 6 points 9 months ago

The old Apple AirPort Express could turn any USB printer into a networked printer.

[-] projectsquared@lemmy.world 4 points 9 months ago

Absolutely this. Find them online for $10 all day.

I'm a systems engineer, so it would be a short project for me. My homelab router could run the print server, but the USB port is currently powering my pi hole.

I feel like there would be some way to rig an esp32 or similar micro controller to do the same thing (pis can be scarce atm

[-] mosiacmango@lemm.ee 2 points 9 months ago

A powered plugin usb hub would likely be easier.

But not as fun as making my own.

[-] mosiacmango@lemm.ee 2 points 9 months ago* (last edited 9 months ago)

Entertainment always wins over efficiency.

Security too. I dont trust 90% of internet connected devices.

[-] frezik@midwest.social 1 points 9 months ago

Rpi stock issues are well behind us. You can buy them straight up now. Even the 1GB RPi4.

Esp32 may not have enough RAM to buffer large prints, especially if there's a lot of graphics. It is possible to give it up to 4MB of external RAM, but that's still not much.

Pi Pico can do a 16MB external RAM chip. That's starting to be adaqute.

I had an HP 5si for a while with 20MB of internal RAM. It struggled with Postscript printing--could only buffer and print one page at a time. Did fine with HP's own PDL drivers, though.

I still had some trouble getting the Zero 2Ws, but a lot of sellers still have a limit of 1 per order.

I'll probably use my Zero W for the print server once I replace the controller for my snake's enclosure with a 2.

[-] LWD@lemm.ee 12 points 9 months ago

Have you looked into printers that accept refillable containers of ink rather than cartridges? I haven't looked too closely, but I see Epson makes some too, and the prices are pretty reasonable.

[-] pearsaltchocolatebar@discuss.online 16 points 9 months ago

I haven't had any reason to print in color for like 20 years. I'm sure many consumers are the same.

If I do need to print color, I'll pay $0.10 at UPS or the library or whatever to print it off.

[-] Gerudo@lemm.ee 9 points 9 months ago

Every inkjet printer on this planet has a choice. Cheap ink, accessible printheads, expensive. You have to pick one.

Certain Hp? Expensive cartridges but new print heads with every cart. Epson ecotank? Cheap ink but non replaceable printheads. High-end printers? Insanely priced printheads and ink.

The only way out is laser.

[-] LWD@lemm.ee 4 points 9 months ago

"Pick two..."

I'm refilling stock HP cartridges for now, so I guess I'm technically getting the best of both worlds, but I wouldn't wish the process of replacement on anybody.

[-] Treczoks@lemmy.world 6 points 9 months ago

But have a close look at the model you are buying. We recently noticed that the relatively cheap Epson Ecotank we bought for our daughter is a bit difficult to maintain. You simply have no access to the printheads.

[-] jelloeater85@lemmy.world 1 points 9 months ago

2170 crowd represent!!!

Those things run forever and cost nothing to run.

I think I've only bought 3x toner cartridges, and one of those got lost because I shook the old one and it just kept working for a year or two.

this post was submitted on 19 Jan 2024
529 points (97.1% liked)

Technology

59020 readers
2730 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 1 year ago
MODERATORS