view the rest of the comments
3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)
Moderation policy: Light, mostly invisible
I know two of mine were. 3d printers and quadcopters were both cutting edge, barely developed tech when I started out. Now they are full-on industries
Same here. FPV and 3D printing. Then there’s Ergo Mechanical Keyboards. And now I’m just straight up making my own projects with microcontrollers.
Seems we like the same stuff. I've been using a Kenesis Advantage 2 since 2015. I've considered making my own, but the Kenesis is pretty great. The only drawback is that the layout isn't good for FPS games.
I built a couple of 98mph 5" FPV quadcopters for about $150 around 4 years ago. I recently wanted to add a 3" to my collection and was absolutely shocked at the prices. What the heck happened there? It would cost me $500+ to build the same quadcopter that I built for $150.
DarwinFPV BabyApe is $80 and flies better than anything you’ve built 4 years ago due to improvements in Betaflight. Sure, if you want O3 you need to pay more.
Can I just update BetaFlight on my current FCs?
What is 03?
You probably can! At least if your FCs are at least F4/F7 - F3 series microcontrollers are no longer supported. But the way Betaflight 'upgrades' work you'll need to reconfigure the FC after the upgrade. And using the CLI dump made with an older firmware version isn't supported - some options go away or get renamed, PID tuning options in particular should not be blindly copied between versions.
O3 is the best quality digital video system (made by DJI). The air unit (camera+digital vtx) is $230, and the goggles are $500. It can also record up to 4K at 120 FPS (in-goggle max quality is 1080p at 100FPS). Analog is definitely way cheaper (at least the vtx side), but I think most people who could afford digital have switched over the last couple of years.
Thank you for all of the information! I'll try to update my FCs this weekend.