136
submitted 11 months ago* (last edited 11 months ago) by PumpkinDrama@reddthat.com to c/nostupidquestions@lemmy.world

I have a set of 3 Bra Premiere non-stick frying pans that I've used for a while. The coating on them says "Teflon Innovations without PFOA". Recently I've noticed that on the most used pan, the 26cm one, the Teflon coating has started to peel off.

I know that Teflon coatings can release harmful fumes and chemicals if overheated, but what about if the coating is physically peeling? Is it still safe to cook with them? Or should I stop using especially the 26cm one? I don't want to keep exposing my family to anything dangerous unknowingly. Any advice if these types of pans are still safe to cook with if the nonstick surface is peeling would be appreciated!

you are viewing a single comment's thread
view the rest of the comments
[-] madcaesar@lemmy.world 9 points 11 months ago

Ugh... I've tried this route... I really have, but shit like eggs sticking like a mother fucker is just too annoying. Unless you drench the pan in oil.

I've switched to ceramic non-stick, I'm sure it's not perfect either but you gotta make compromises.

[-] PutangInaMo@lemmy.world 4 points 11 months ago

I've dedicated myself to figuring this out. It's not that you have to drench it in oil, but there needs to be enough to cover the pan.

The most important part though is that the pan is heated up enough when you crack eggs on it. And give the eggs a little bit of time to cook before flipping them.

It takes a lot of practice and you're going to be eating scrambled eggs instead of fried eggs for a while. But keep at it.

[-] Pulptastic@midwest.social 3 points 11 months ago

There is a Goldilocks temperature with stainless for cooking eggs. Too hot or too cold and it sticks. I had the ritual down before COVID, where I would turn the pan on and prep my coffee while it heated up to the perfect temp.

[-] icanwatermyplants@reddthat.com 1 points 11 months ago

I've baked eggs on stainless for a while, best advice I have is to get the eggs out of the fridge like 15 mins before you bake them. That way the temperature difference is less when they hit the pan. The same goes for baking eggs in any other type of pan.

Fish, now that takes practice and patience.

[-] tuxtey@lemmy.world 1 points 11 months ago

This, so much this. The eggs need to cook long enough to the bottom of the pan to then release themselves. Cooking temp is super important here.

[-] Crozekiel@lemmy.zip 2 points 11 months ago

It sounds like ya'll are over cooking your eggs... At least for my taste.

[-] Furbag@lemmy.world 3 points 11 months ago

Eggs are indeed tricky on the stainless. I have found that ceramic or a well-seasoned cast iron pan is a lot better for eggs if you aren't good at hitting that exact temperature that they need to be at to cook and release on their own with just a minimal amount of oil/butter. My parents have a single teflon pan that is just for eggs, but they cook eggs so frequently that they need to replace it all the time because it starts to peel and flake in no time flat.

[-] Sunroc@lemmy.world 3 points 11 months ago

Have a ceramic pan dedicated for sticky stuff that doesn't need to be cooked too hot. Ceramic that is not used on high heat lasts a long time. Obviously with wood of silicone utensils.

[-] ozebb@lemmy.world 2 points 11 months ago

Well-seasoned, smooth bottomed cast iron or carbon steel can be great egg pans. There's a learning curve but IMO the maintenance isn't as daunting as many think.

I've got a de Buyer carbon steel pan that we use for eggs most mornings; it doesn't perform identically to a Teflon pan but it's still very very good. Maintenance is just (1) a drop of oil before the food goes in, (2) quick wipe under the faucet with a dish brush, and (3) dry with a dish cloth before putting away. I've had the pan for almost 10 years now and there's no reason it shouldn't last the rest of my life (and then some).

[-] mostNONheinous@lemmy.world 2 points 11 months ago

You might be cooking to hot, I use cast iron so I can’t speak directly about steel but low and slow is best for eggs on cast iron.

[-] Johnmannesca@lemmy.world 1 points 11 months ago

Just use cast iron at that point. Season it well enough and it'll be smoother than any nonstick you can buy

[-] aesthelete@lemmy.world 0 points 11 months ago

Unless you drench the pan in oil.

Nah, you can develop technique to prevent this. What's great is on stainless you can use a stainless turner as well. When it comes to eggs it's all about adding enough butter to cover the bottom of the pan and then keeping the egg moving after the initial side is cooked enough to release.

Omelettes are the same on stainless. You just have to keep things moving. It requires a little more technique and attention but IMO that's better than having a side of Teflon flakes with breakfast.

this post was submitted on 23 Nov 2023
136 points (96.6% liked)

No Stupid Questions

35717 readers
868 users here now

No such thing. Ask away!

!nostupidquestions is a community dedicated to being helpful and answering each others' questions on various topics.

The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:

Rules (interactive)


Rule 1- All posts must be legitimate questions. All post titles must include a question.

All posts must be legitimate questions, and all post titles must include a question. Questions that are joke or trolling questions, memes, song lyrics as title, etc. are not allowed here. See Rule 6 for all exceptions.



Rule 2- Your question subject cannot be illegal or NSFW material.

Your question subject cannot be illegal or NSFW material. You will be warned first, banned second.



Rule 3- Do not seek mental, medical and professional help here.

Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.



Rule 4- No self promotion or upvote-farming of any kind.

That's it.



Rule 5- No baiting or sealioning or promoting an agenda.

Questions which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.



Rule 6- Regarding META posts and joke questions.

Provided it is about the community itself, you may post non-question posts using the [META] tag on your post title.

On fridays, you are allowed to post meme and troll questions, on the condition that it's in text format only, and conforms with our other rules. These posts MUST include the [NSQ Friday] tag in their title.

If you post a serious question on friday and are looking only for legitimate answers, then please include the [Serious] tag on your post. Irrelevant replies will then be removed by moderators.



Rule 7- You can't intentionally annoy, mock, or harass other members.

If you intentionally annoy, mock, harass, or discriminate against any individual member, you will be removed.

Likewise, if you are a member, sympathiser or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people, and you were provably vocal about your hate, then you will be banned on sight.



Rule 8- All comments should try to stay relevant to their parent content.



Rule 9- Reposts from other platforms are not allowed.

Let everyone have their own content.



Rule 10- Majority of bots aren't allowed to participate here.



Credits

Our breathtaking icon was bestowed upon us by @Cevilia!

The greatest banner of all time: by @TheOneWithTheHair!

founded 1 year ago
MODERATORS