3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
You will need a top for it either way, but it worked reasonably fine with a ikea like crate. (Had this while my old Bambu printed the enclosure)
It needs proper preheating of course AND a proper ventilation concept as the enclosure is far less air tight compared to e.g. the Bambus. And while ASA it not as nasty as ABS it still anything but healthy.
Good to know, how’s the heater work, pretty ok, I am thinking on picking one up, right now (on my bambu) I just have it in a larger insulated tent enclosure and heat the plate for 20 minutes but that’s a pain
I have the Srin Top hat with 6mm panels (that helps considerably with keeping the heat in) and the Panda breath. I would rather not heat such a large enclosure as well,as it also fries the motherboard,etc. and it additionally produces very uneven heat.