this post was submitted on 13 Mar 2026
41 points (97.7% liked)
Technology
42489 readers
103 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 4 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
The total voltage or amperage of the battery pack does not mean anything for the battery cells. You can put more cells in series and get a higher voltage at lower current, or more in parallel and get a higher current at a lower voltage. But all individual cells will run at the same voltage in either configuration (iirc between 3 and 4V), and the current per cell will also be the same for a given load regardless of the situation.
The main thing a higher battery pack voltage accomplishes is that the cables connected to the battery don't need to be as thick, as the required thickness of a cable depends only on current, not voltage.