3DPrinting

20357 readers

133 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

Qidi X-Max 3 - not performing as expected (lemmy.dbzer0.com)

submitted 1 day ago* (last edited 1 day ago) by ExcessShiv@lemmy.dbzer0.com to c/3dprinting@lemmy.world

7 comments fedilink hide all child comments

I bought a new Qidi X-Max 3 on their BF sale for 500EUR, which seemed like a great deal and I've been wanting an enclosed klipper core-xy printer for some time for more demanding prints in engineering filaments, so I pulled the trigger.

I've now had the printer for two days, and it's somewhat of a disappointment unfortunately.

The printing speed and quality of the prints are good, nothing to complain about here.

My issue is with their bed meshing and first layer. The bed is crooked as hell with a massive 0.45mm deviance from lowest to highest point, but it should not be a big issue with bed meshing because it should compensate. But it just seems like it's not compensating at all, the parts of prints that are closest to flat plane have great first layer, all other places are either way too squished or not squished at all. This means I can only get a proper first layer on about 1/3 of the bed, either front, middle or back part.

This is in stark contrast to my semi-custom anycubic bedslinger with klipper, which lays down near perfect first layer every time, without adjust Z-offset across the entire plate. And I was honestly expecting the same from the Qidi.

I have run their calibration routine multiple times. I'm fairly well versed in the 3D hobby. Is there some setting in the Qidi that I'm missing? It's running their own dirty klipper version, who knows what they've changed/missed from newest mainline. I am already considering returning as I was expecting more of a turn-key printer that my experience so far.

you are viewing a single comment's thread
view the rest of the comments

[–] Bluewing@lemmy.world 1 points 14 hours ago

I suspect the stepper screws of not being properly timed then.

I'm not sure just how the bed homes top or bottom, but I would home the bed, shut the printer off so the steppers are off and not locked, then turn all the screws by hand to deadhead against a hard stop to even them out. The bed should be as level as it can be then.

Pro way: Use a test indicator solidly attached to the print head and move it around the bare heat bed by hand. Turn the screws until they are all zeroed out. I did that to my Prusa Mk3s when I first built it years ago.

Is that over kill? Yes, yes it is. But as an old toolmaker, I have the tools to do that kind of super fussy inspection. I also used a granite surface plate and precision squares to build the frame on to ensure prefect alignment of the frame. Ahhh the boredom of being quarantined.