this post was submitted on 27 Sep 2025
682 points (98.3% liked)
Fuck AI
5461 readers
1059 users here now
"We did it, Patrick! We made a technological breakthrough!"
A place for all those who loathe AI to discuss things, post articles, and ridicule the AI hype. Proud supporter of working people. And proud booer of SXSW 2024.
AI, in this case, refers to LLMs, GPT technology, and anything listed as "AI" meant to increase market valuations.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
There’s no ground pin, but there’s no hot wire.
This is a plug. The big pins are live + neutral, which are shorted together and connected to the wire labeled ground (which heads to the exposed metal of whatever appliance is on the end of this cable).
Yes there is, the earth is connected directly to phase.
hot wire is in the socket, assuming it was wired correctly
Yeah, this circuit would do a whole lot of nothing since the ground is the only wire entering the circuit.
It would put phase directly on the metal casing of the appliance, if the circuit protection didn't work.
Please avoid the temptation to comment on something you know nothing about, this is actually a serious safety concern if someone followed this diagram.
Even worse. Orientation of pins like this is used in 240V circuit which means it has two antiphase live wires. This means that after shorting them, if one trips but not the other (if these two have independent breakers - idk if code requires otherwise) 120V is sent to device ground, and this one can be cut off by GFCI if used, but i hear it's uncommon
If it was normal 120V circuit, breaker would cut off live and left neutral connected to device ground, which still can be some 20V depending on conditions
Ooh, I hadn't even thought about voltage being backfed through the neutral.
Have you heard of something called a floating neutral? That could cause some issues.
Yea, but at this point multiple things are seriously wrong