3DPrinting

19580 readers

67 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

BL A1 Textured PEI plate, print is warping. What to try first? (lemmy.world)

submitted 4 days ago by KingDingbat@lemmy.world to c/3dprinting@lemmy.world

9 comments fedilink hide all child comments

I have a BambuLabs A1 and a textured PEI plate. I'm using PETG filament

I'm printing my first larger footprint project and isn't going great after dozens of flawless smaller prints. The model curls up at the corners (warping) while it is printing.

I attempted to help by adding a raft and brim, but it still happened. The plate has been freshly cleaned too, so there shouldn't be oils. I don't enclose the printer because my garage's ambient temp is typically pretty hot, between 95-110 degrees this time of year and rarely fluctuates. I say this not really knowing what enclosing the printer might bring it up to inside. I just haven't had any problems that required it so far... so?

After reading up on the problem my first thought was to increase the temp of the print bed to help keep the layers from cooling too fast. I usually use BambuStudio's default settings for PETG. But what temp to set it to?

Also, considering adding adhesive to the plate, but not sure what would work well with the textured PEI plate.

Any thoughts to help me out? Thanks!

you are viewing a single comment's thread
view the rest of the comments

[–] Thedogdrinkscoffee@lemmy.ca 3 points 4 days ago

1st thought is bed adhesion. Clean better? 2nd thought is filament parameters. Whose PETG filament are you using? Bambu's default are for their filament, yours may be different. 3rd, cooling at the edges, the A1 has no box around, IIRC. Can you make a DIY cover to hold the heat in or raise the room temperature or avoid cool drafts.

Post pics?