overview for server

Proxmox AMD GPU Passthrough in c/proxmox@lemmy.world

[-] server_paul@lemmy.world 1 points 10 months ago

It was inteded to be a code block, but that way it was just a bunch of text without newlines somehow

Proxmox AMD GPU Passthrough in c/proxmox@lemmy.world

[-] server_paul@lemmy.world 2 points 10 months ago

Just fyi, the 6 y-flags were shown

Advice on Linux Notebook in c/linux@lemmy.world

[-] server_paul@lemmy.world 2 points 10 months ago

I already searched for Thinkpads but honestly didnt put in that much effort (for now)

Proxmox AMD GPU Passthrough in c/proxmox@lemmy.world

[-] server_paul@lemmy.world 1 points 10 months ago

Haha, I already started worrying about that :) But you‘re right, its great.

Proxmox AMD GPU Passthrough in c/proxmox@lemmy.world

[-] server_paul@lemmy.world 2 points 10 months ago* (last edited 10 months ago)

To everyone else encountering this error, I finally fixed it this way: This forum entry sent me here, which then helped me resolve the issue. Huge thanks to you, InEnduringGrowStrong, for pushing me in the right direction.

Proxmox AMD GPU Passthrough in c/proxmox@lemmy.world

[-] server_paul@lemmy.world 2 points 10 months ago* (last edited 10 months ago)

dmesg also reported vendor_reset: module verification failed: signature and/or required key missing - tainting kernel However, according to https://github.com/gnif/vendor-reset/issues/46#issuecomment-983087796 this error is not as important...

Proxmox AMD GPU Passthrough in c/proxmox@lemmy.world

[-] server_paul@lemmy.world 2 points 10 months ago* (last edited 10 months ago)

This is the output from journalctl, since stopping and rebooting the VM: Main error seems to occur at 16:41:43 `Dec 19 16:40:45 pve pvedaemon[1590]: end task UPID:pve:00030675:000E7952:6581B96F:vncshell::root@pam: OK

Dec 19 16:40:47 pve kernel: vfio-pci 0000:03:00.0: not ready 16383ms after bus reset; waiting

Dec 19 16:41:03 pve pvedaemon[1590]: starting task UPID:pve:000308EE:000E85EB:6581B98F:qmstart:195:root@pam:

Dec 19 16:41:03 pve pvedaemon[198894]: start VM 195: UPID:pve:000308EE:000E85EB:6581B98F:qmstart:195:root@pam:

Dec 19 16:41:06 pve kernel: vfio-pci 0000:03:00.0: not ready 32767ms after bus reset; waiting

Dec 19 16:41:40 pve kernel: vfio-pci 0000:03:00.0: not ready 65535ms after bus reset; giving up

Dec 19 16:41:41 pve kernel: vfio-pci 0000:03:00.1: Unable to change power state from D0 to D3hot, device inaccessible

Dec 19 16:41:41 pve kernel: vfio-pci 0000:03:00.0: Unable to change power state from D0 to D3hot, device inaccessible

Dec 19 16:41:41 pve systemd[1]: 195.scope: Deactivated successfully.

Dec 19 16:41:41 pve systemd[1]: 195.scope: Consumed 54min 2.778s CPU time.

Dec 19 16:41:41 pve systemd[1]: Started 195.scope.

Dec 19 16:41:41 pve kernel: tap195i0: entered promiscuous mode

Dec 19 16:41:41 pve kernel: vmbr0: port 4(fwpr195p0) entered blocking state

Dec 19 16:41:41 pve kernel: vmbr0: port 4(fwpr195p0) entered disabled state

Dec 19 16:41:41 pve kernel: fwpr195p0: entered allmulticast mode

Dec 19 16:41:41 pve kernel: fwpr195p0: entered promiscuous mode

Dec 19 16:41:41 pve kernel: vmbr0: port 4(fwpr195p0) entered blocking state

Dec 19 16:41:41 pve kernel: vmbr0: port 4(fwpr195p0) entered forwarding state

Dec 19 16:41:41 pve kernel: fwbr195i0: port 1(fwln195i0) entered blocking state

Dec 19 16:41:41 pve kernel: fwbr195i0: port 1(fwln195i0) entered disabled state

Dec 19 16:41:41 pve kernel: fwln195i0: entered allmulticast mode

Dec 19 16:41:41 pve kernel: fwln195i0: entered promiscuous mode

Dec 19 16:41:41 pve kernel: fwbr195i0: port 1(fwln195i0) entered blocking state

Dec 19 16:41:41 pve kernel: fwbr195i0: port 1(fwln195i0) entered forwarding state

Dec 19 16:41:41 pve kernel: fwbr195i0: port 2(tap195i0) entered blocking state

Dec 19 16:41:41 pve kernel: fwbr195i0: port 2(tap195i0) entered disabled state

Dec 19 16:41:41 pve kernel: tap195i0: entered allmulticast mode

Dec 19 16:41:41 pve kernel: fwbr195i0: port 2(tap195i0) entered blocking state

Dec 19 16:41:41 pve kernel: fwbr195i0: port 2(tap195i0) entered forwarding state

Dec 19 16:41:43 pve kernel: vfio-pci 0000:03:00.0: Unable to change power state from D3cold to D0, device inaccessible

Dec 19 16:41:43 pve kernel: vfio-pci 0000:03:00.1: Unable to change power state from D3cold to D0, device inaccessible

Dec 19 16:41:43 pve kernel: vfio-pci 0000:03:00.0: Unable to change power state from D3cold to D0, device inaccessible

Dec 19 16:41:43 pve kernel: vfio-pci 0000:03:00.1: Unable to change power state from D3cold to D0, device inaccessible

Dec 19 16:41:44 pve kernel: pcieport 0000:02:00.0: broken device, retraining non-functional downstream link at 2.5GT/s

Dec 19 16:41:44 pve pvedaemon[1592]: VM 195 qmp command failed - VM 195 not running

Dec 19 16:41:45 pve kernel: pcieport 0000:02:00.0: retraining failed

Dec 19 16:41:46 pve kernel: pcieport 0000:02:00.0: broken device, retraining non-functional downstream link at 2.5GT/s

Dec 19 16:41:47 pve kernel: pcieport 0000:02:00.0: retraining failed

Dec 19 16:41:47 pve kernel: vfio-pci 0000:03:00.0: not ready 1023ms after bus reset; waiting

Dec 19 16:41:48 pve kernel: vfio-pci 0000:03:00.0: not ready 2047ms after bus reset; waiting

Dec 19 16:41:50 pve kernel: vfio-pci 0000:03:00.0: not ready 4095ms after bus reset; waiting

Dec 19 16:41:54 pve kernel: vfio-pci 0000:03:00.0: not ready 8191ms after bus reset; waiting

Dec 19 16:42:03 pve kernel: vfio-pci 0000:03:00.0: not ready 16383ms after bus reset; waiting

Dec 19 16:42:21 pve kernel: vfio-pci 0000:03:00.0: not ready 32767ms after bus reset; waiting

Dec 19 16:42:56 pve kernel: vfio-pci 0000:03:00.0: not ready 65535ms after bus reset; giving up

Dec 19 16:42:56 pve kernel: vfio-pci 0000:03:00.1: Unable to change power state from D3cold to D0, device inaccessible

Dec 19 16:42:56 pve kernel: vfio-pci 0000:03:00.0: Unable to change power state from D3cold to D0, device inaccessible

Dec 19 16:42:56 pve kernel: fwbr195i0: port 2(tap195i0) entered disabled state

Dec 19 16:42:56 pve kernel: tap195i0 (unregistering): left allmulticast mode

Dec 19 16:42:56 pve kernel: fwbr195i0: port 2(tap195i0) entered disabled state

Dec 19 16:42:56 pve pvedaemon[199553]: stopping swtpm instance (pid 199561) due to QEMU startup error

Dec 19 16:42:56 pve pvedaemon[198894]: start failed: QEMU exited with code 1

Dec 19 16:42:56 pve pvedaemon[1590]: end task UPID:pve:000308EE:000E85EB:6581B98F:qmstart:195:root@pam: start failed: QEMU exit>

Dec 19 16:42:56 pve systemd[1]: 195.scope: Deactivated successfully.

Dec 19 16:42:56 pve systemd[1]: 195.scope: Consumed 1.736s CPU time.`

Proxmox AMD GPU Passthrough in c/proxmox@lemmy.world

[-] server_paul@lemmy.world 2 points 10 months ago

Yeah, i tried that - the link was just not shown in the original post That didnt really fix it

7

Proxmox AMD GPU Passthrough (lemmy.world)

submitted 10 months ago* (last edited 10 months ago) by server_paul@lemmy.world to c/proxmox@lemmy.world

12 comments fedilink

I've been using a Proxmox home server for quite some time now without many problems. Recently i got an AMD Navi 10 RX 5700 XT and tried to pass it through to a windows VM. I mainly followed the official Proxmox guide but got it running by using some other tutorials too. For now, it works once after i reboot the host. Then its no problem to start the VM, but after a restart the VM doesnt start no more, showing this error: swtpm_setup: Not overwriting existing state file. kvm: ../hw/pci/pci.c:1637: pci_irq_handler: Assertion 0 <= irq_num && irq_num < PCI_NUM_PINS' failed. stopping swtpm instance (pid 98348) due to QEMU startup error TASK ERROR: start failed: QEMU exited with code -1` I tried fixing it using this but it didnt change much.

EDIT: link was not shown

Advice on Linux Notebook in c/linux@lemmy.world

[-] server_paul@lemmy.world 2 points 10 months ago

looks good so far, thanks

9

Advice on Linux Notebook (lemmy.world)

submitted 10 months ago by server_paul@lemmy.world to c/linux@lemmy.world

3 comments fedilink

I‘m currently running a HP 255 G8 with: 11th-Gen i5, 16GB RAM, 500GB NVME SSD + 2TB SATA SSD, HDMI and USB-C. Its a great notebook with one flaw. I‘d love to have a USB-C port supporting Power Delivery and DisplayPort/Thunderbolt => possibility to plug in one cable and charge, connect to peripherals (boxes, mouse, keyboard) and also to 2 external monitors.

I also don‘t need that much hard drive space, RAM and CPU power as I have another desktop PC. So, I‘m looking for a new notebook with a full-functional USB-C port and sleek specs besides that. - Consider Specs like screen size etc., that I didn‘t mention as not important.

It should also be cheap (as cheap as possible of course). I thought about an Aspire 5 or a Slimbook Elemental: both <600€. Do you have some other suggestions?