33
Recommendation for low power SSD (derpzilla.net)
submitted 6 months ago by Kwa@derpzilla.net to c/selfhosted@lemmy.world
54 comments fedilink hide all child comments

I’m trying to improve the power consumption of my NAS. The 2 (7200 rpm) HDDs I had were using 15W at idle and 5W when spun down. I’m reading a lot of conflicting information about what is lower power between HDD, SSD and NVMe SSD. Eventually I started looking at SATA SSD (please let me know if this is not the most power efficient)

I found this site that shows a benchmark of different SSDs and their average power consumption. I was about to go with WD Red but then I found a YouTube video saying I shouldn’t go with WD for a NAS.

Can you tell me what brand or model you’re using in your homelab that’s power efficient? Ideally I would like 4TB SSD.

Thanks!

top 50 comments
sorted by: hot top controversial new old
[-] anamethatisnt@lemmy.world 13 points 6 months ago

If you go for SSD another thing to think about is the TBW on them. Buying a low endurance SSD might save some electricity but will cost more in SSDs over time. Example:
Crucial P3 Plus M.2 NVMe SSD 2TB (2.67W on your link) has 440TBW compared to Kingston Fury Renegade M.2 NVMe SSD Gen 4 2TB (4.92W on your link) with 2000TBW.
Those few watts you save on using the Crucial P3 Plus will be less than the extra cost in buying new SSDs earlier.
The site I checked TBW on has the Kingston Fury at $9.4 more than the Crucial P3 Plus.

I think proper datacenter 3.5'' HDDs will give you the most efficient Wattage per TB disk space
Seagate Exos X20 Harddisk ST20000NM007D 20TB SATA-600 7200rpm is supposed to have
Power Consumption 5.4 Watt (idle) | 9.4 Watt (random read) | 6.4 Watt (random write)

[-] agressivelyPassive@feddit.de 7 points 6 months ago

In general, one should check how much power actually costs versus buying a new device.

Even in Germany, having something draw 1W 24/7 costs something like 20 cents. It's really not worth the hassle or money to micro optimize and buy something like an SSD.

[-] EinfachUnersetzlich@lemm.ee 5 points 6 months ago

Costs 20 cents per what? That's about 0.7kWh per month so I'm guessing it's per month?

[-] agressivelyPassive@feddit.de 3 points 6 months ago

Yes, I forgot that, it was a long day.

[-] Kwa@derpzilla.net 3 points 6 months ago

Indeed, I haven’t thought about the W/TB. This is definitely something I’ll to consider, thanks!

[-] poVoq@slrpnk.net 12 points 6 months ago* (last edited 6 months ago)

2.5" 5400rpm HDDs are the most power efficient in my experience. They use around 1W when in normal use.

SSDs generally use power according to their actual utilization. The faster they are the higher the power consumption seems to be. SATA SSDs are generally slower and fall into the 1-3W bracket, NVMe SSDs are more like 5-10W, especially the PCIe 4.0 ones.

Don't quote me on these figures, I have not extensively tested them and they are very rough ball-park ones.

[-] Flipper@programming.dev 1 points 6 months ago

Probably worth noting that is pretty hard to find new 2.5" drives with reasonable TBW and prices nowadays.

[-] Kwa@derpzilla.net 1 points 6 months ago

With what I saw with me current HDDs I wouldn’t have though smaller HDD would be the most power efficient. And now I understand better why sometimes I read HDD can be more efficient than SSD.

Any brands/models you would recommend?

[-] poVoq@slrpnk.net 4 points 6 months ago

I don't think the power efficiency of the different brands is that much of a difference that it makes sense to only buy specific ones. For SSDs it is rather important to buy from reliable vendors that are not only repackaging the cheapest nand chips they can currently find on the market. In the past Samsung was always a good choice, but my most recent purchase of a PCIe 4.0 SSD from them was not so great in regards to reliability, so I am starting to wonder if they are cutting corners somewhere these days.

[-] Kwa@derpzilla.net 1 points 6 months ago

Ok thanks!

[-] paraphrand@lemmy.world 1 points 6 months ago* (last edited 6 months ago)

Huh, that’s unintuitive to me. I remember people talking about too many hard drives in a case using too much power before. Overloading it, etc. 1-2W each would not overload a normal power supply. 🤔

Did hard drives just quietly get super efficient when I wasn’t paying attention? Or is something else going over my head here?

[-] poVoq@slrpnk.net 3 points 6 months ago* (last edited 6 months ago)

There is a huge difference in power-draw between 2.5" 5400rpm HDDs that one would typically find in a laptop and 3.5" 7200rpm HDDs that are often used in servers even at similar storage capacities. The latter typically use 10W each during normal operation and even a bit more during spin-up. But if you want to optimize your NAS for low power consumption you can use those small 2.5" HDDs just fine (of course being aware that these are not built to withstand the same kind of (ab)use as HDDs specifically built for NAS or datacenter use).

Edit: of course these small drives are not available in more than I think 4TB right now, and if you want to built really large pools of tens to hundreds of TB then the bigger 3.5" HDDs at some point become more power efficient for the same storage space.

load more comments (31 replies)
[-] czardestructo@lemmy.world 5 points 6 months ago* (last edited 6 months ago)

My server is a ryzen 5600g based and has; 2 x m.2 SSDs, 3xSATA SSDs (20TB) and one spun down mechanical disk (14TB) and my total idle power is around 27W. The mechanical disk is the only notable load, unplugging it can save me 5W idle and when it spins up its about 15W total. I can give you specific model numbers if you like.

[-] Kwa@derpzilla.net 2 points 6 months ago

Thanks, yes, I’m interested in the SSDs models!

[-] czardestructo@lemmy.world 4 points 6 months ago* (last edited 6 months ago)

Here is the list!

1 x Samsung SSD 980 1TB

1 x Adata XPG SX8200 Pro 2TB

2 x Samsung SSD 870 QVO 8TB

1 x Western digital engineering sample. Cannot comment. 4TB

1 x Seagate Exos X16 14tb

[-] acockworkorange@mander.xyz 4 points 6 months ago

If you use zfs, you could buy an nvme drive to serve as cache, allowing your HDDs to spin down for a longer time.

[-] Jumuta@sh.itjust.works 3 points 6 months ago

tomshardware has power consumption+efficiency charts chart

site

[-] Decronym@lemmy.decronym.xyz 2 points 6 months ago* (last edited 6 months ago)

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:

Fewer Letters More Letters
NAS Network-Attached Storage
NVMe Non-Volatile Memory Express interface for mass storage
PCIe Peripheral Component Interconnect Express
SATA Serial AT Attachment interface for mass storage
SSD Solid State Drive mass storage

[Thread #673 for this sub, first seen 11th Apr 2024, 19:25] [FAQ] [Full list] [Contact] [Source code]

[-] Ludrol@szmer.info 1 points 6 months ago

Maybe you are looking at the wrong thing. CPU + motherboard controllers idle state matters more than spun down hdds

I saw a spreadsheet somewhere of a lot of cpu + motherboard combinations with idle power consumption for ultra low energy NAS optimisation.

[-] Dumbkid@lemmy.dbzer0.com 1 points 6 months ago

Yeah whatever I'm doing is bad, 5800x in 65w eco mode and asrock pro4m "idles"(all hdds spun down) at like 150watts. I run like 20 dockers on it so I don't think it ever really idles

[-] Kwa@derpzilla.net 1 points 6 months ago

The issue is that’s it’s too late… I already have my NAS. The only things I can optimize are the disks

[-] Ludrol@szmer.info 1 points 6 months ago

Still you can calculate how much you will save with 2w power reduction with selling this one and buying different NAS.

You can reduce the disk idle time after access to 5-15 min for better power saving.

load more comments
view more: next ›
this post was submitted on 11 Apr 2024
33 points (94.6% liked)

Selfhosted

39677 readers
403 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS
ruud@lemmy.world
Loki@lemmy.world
CannaVet@lemmy.world
devve@lemmy.world
HybridSarcasm@lemmy.world
HybridSarcasm@lemmy.hybridsarcasm.xyz