160
top 9 comments
sorted by: hot top controversial new old
[-] Bakkoda@sh.itjust.works 33 points 8 months ago* (last edited 8 months ago)

My door thresholds from Lowes. Every single one.

[-] Duranie@literature.cafe 21 points 8 months ago

It needs oil. Oil will break down the adhesive and shouldn't be hard to clean off of a sealed/finished surface. I've used anything from a few drops of cooking oil to peanut butter (doesn't run!) and let it sit. Depending on the adhesive it could take minutes or hours, but typically makes removal much easier.

[-] riodoro1@lemmy.world 10 points 8 months ago

Make sure to use a solvent that damages that surface. Easy peel stickers are apparently yet to be developed.

[-] Mac@mander.xyz 5 points 8 months ago

Easy-peel stickers are everywhere. They're made of plastic instead of paper.

[-] clearedtoland@lemmy.world 4 points 8 months ago

Goo Gone. Or WD40. Works for asshole-designed stickers and bandaids!

[-] Bakkoda@sh.itjust.works 3 points 8 months ago

Vinyl stickers cut into bottom lines. I've got gallons of mineral oil, did the trick.

[-] Mango@lemmy.world 10 points 8 months ago

It's so you gotta buy a second scraper.

[-] DannyBoy@sh.itjust.works 8 points 8 months ago

Like Hank Hill opening his WD40 can with a smaller WD40 can.

[-] HubertManne@kbin.social 10 points 8 months ago

I feel for this one. This is such a stupid common thing. I also hate the thing where packaging was made more difficult to discourage returns but that thankfully has at least reduced from its height.

this post was submitted on 08 Jan 2024
160 points (94.0% liked)

AssholeDesign

6782 readers
1 users here now

This is a community for designs specifically crafted to make the experience worse for the user. This can be due to greed, apathy, laziness or just downright scumbaggery.

founded 1 year ago
MODERATORS