20
You bought a device with just one single USB 2.0 port and ask for the ideal storage option?
I could be wrong, but you're probably limited to one external HDD (~20 TB) and one micro SD card (1 TB).
Kinda... Nothing will be ideal in this setup, so I just want to know how to make the best with what I have. Thanks for the suggestion!
The best depends in what you need... What are your requirements in terms of capacity, speed and redundancy?
My concerns with using external storage on a Pi is backup.
Drives fail, externals even more so.
I suppose you could add a powered USB hub. But you'd really want a backup/replication plan to something like Backblaze B2, etc.
Thanks! I'll see what options of powered USB hubs I got
Quick question about the hubs. I saw some with 5+ ports. Using USB 2.0 I know I'll have some limitations on speed, but could I for instance, plug 5 HDDs and this speed would be evenly divided among then (given a moment where they all would get written at the same time)? If only 1 HDD is being written, would it get this full speed? Is this math that simple or are there more things that I'm not considering?
devices on the hub share the total bandwidth to/from the host system's usb port. data going between drives on the same hub has to travel to the host then back again.
so: transferring files to/from a single drive will go 'full speed', transferring files between two drives on that hub will run at about half speed, accessing data on all the drives on that hub at the same time (such as syncing a snapraid array built on externals all connected to that hub) will be painfully and brutally slow.
I mean, you can put a powered USB hub on that and get more ports if you want them.
Or get a USB drive enclosure that can take multiple drives.
What a weird choice for a storage-oriented device, I would have gone for a SBC with SATA ports or a PCIe port.
It wasn't exactly a well-thought choice ๐ I wanted to host my services locally so I had to choose between going for an old computer/NUC or a Raspberry Pi and chose the latter because it's not that power hungry. But then Raspberries are very hard to come by and even with the launch of RP5, they still look like very overpriced. So looking for alternatives, I came by the OrangePi, which sounded like a fair option ๐
Its a little late now but you couldn't picked up a board from pine64 that had a pcie slot.
Well, the OPi Zero 3 only has USB 2, which is slow.
You could attach something like this: https://www.ebay.co.uk/itm/403740942791?hash=item5e00d5e1c7:g:I1AAAOSwQgJits1E
Donโt expect it to be fast.
Looks interesting, thanks!
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:
| Fewer Letters | More Letters |
|---|---|
| NUC | Next Unit of Computing brand of Intel small computers |
| PCIe | Peripheral Component Interconnect Express |
| SATA | Serial AT Attachment interface for mass storage |
| SBC | Single-Board Computer |
4 acronyms in this thread; the most compressed thread commented on today has 6 acronyms.
[Thread #342 for this sub, first seen 11th Dec 2023, 17:45] [FAQ] [Full list] [Contact] [Source code]
Why the most hdds?
Get a relatively new, with USB 2.0 and you'll be fine. Powered if its a 3.5"
No reason, really. Just had in my mind that this was the way to get the most storage, but then someone mentioned about a single HDD with 20TB of capacity and idk, this haven't even crossed my mind. Might need to update myself on current HDDs ๐ Thanks for the tip!
You could've just got a board with USB 3 and Gigabit ethernet for that price. https://www.friendlyelec.com/index.php?route=product/product&product_id=279
Or this... https://radxa.com/products/rocke/pie/ or... https://radxa.com/products/zeros/zero3e/
About the NanoPi Neo3
This little thing gets pretty hot with the official case. I had to cut a hole in it to hot glue a tiny fan, powered by the GPIO.
I can't remember the temp. difference right now (it's unplugged) but it was significant.
Oh yes, but I never tweaked it and I haven't had issues with it.
I never heard of any of those SBCs. Pretty interesting, thanks for the tip!
Sure no problem, general rule pick something that is supported by Armbian or will be like the Zero 3e. This will give you way better future support including kernels even after the manufacturer no longer supports the device.
New Lemmy Post: Moving to OrangePi Zero 3, what are my storage options? (https://lemmy.world/post/9439473)
Tagging: #SelfHosted
(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md
Of all the bots on lemmy, this one has got to be the most annoying.
Extremely useful for lemmy discoverability from mastodon
this post was submitted on 11 Dec 2023
20 points (85.7% liked)
Selfhosted
39677 readers
302 users here now
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.
Rules:
-
Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.
-
No spam posting.
-
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.
-
Don't duplicate the full text of your blog or github here. Just post the link for folks to click.
-
Submission headline should match the article title (donโt cherry-pick information from the title to fit your agenda).
-
No trolling.
Resources:
- selfh.st Newsletter and index of selfhosted software and apps
- awesome-selfhosted software
- awesome-sysadmin resources
- Self-Hosted Podcast from Jupiter Broadcasting
Any issues on the community? Report it using the report flag.
Questions? DM the mods!
founded 1 year ago
MODERATORS