this post was submitted on 11 Sep 2023
19 points (100.0% liked)

lockpicking

886 readers
1 users here now

A lemmy community dedicated to the sport of lockpicking. Information about our belt system can be found at https://lpubelts.com.

#Rules

Rule 1 - Possibly Illegal or Inappropriate

We do not facilitate illegal or inappropriate activities, which includes picking locks that are not owned by you. Also, be sure that you are familiar with any legal issues for your state or country.

Rule 2 - Lock Not Owned or In Use

Though asking for assistance in regards to how to open a lock is permitted and encouraged, the lock must not be in use. Any submission looking for assistance in opening a lock that is implied to be, or is visibly in use (eg. a deadbolt still attached to a door, or a padlock with anything secured by a closed shackle) will be locked or deleted. Posting about picking locks or having picked locks in use is also not allowed even if they are your own.

Rule of thumb, lock is "in use" if installed.

Rule 3 - No Emergency Services

We do not provide emergency assistance for opening locks. These violations also generally violate our no "in use" locks rule.

Rule 4 - Being a Jerk

Hate speech, bigotry, and personal attacks are not allowed.

Rule 5 - No Astroturfing

Absolutely no astroturfing.

Definition:

Astroturfing is the practice of masking the sponsors of a message or organization to make it appear as though it originates from and is supported by grassroots participants. It is a practice intended to give the statements or organizations credibility by withholding information about the source's financial connection.

Rule 6 - Off Topic

Posts must stay on topic. Off topic content will be removed at our discretion.

Off topic includes posts asking for lock recommendations, evidence of a lock being picked, and anything not having to do directly with locksport.

Rule 7 - No Stock Photos on Picking Advice Threads

No stock photos on picking advice threads in an attempt to circumvent Rule 2.

Rule 8 - No posts about broken tools or equipment

As some users have demonstrated an inability to discuss this in a productive way, posts about broken tools or equipment will be removed.

This is primarily to address posts commenting on the quality of products (or lack there of) contributing to their breaking.

Rule 9 - No low effort posts / Memes

/c/lockpicking is a subreddit to discuss topics and build a community around a skill, low effort posts and memes take away from that spirit. Including but not limited to photos of keys, Memes, etc

founded 1 year ago
MODERATORS
 

I have an antique desk which has three locks and a single key.

My key continues to work for one of the locks, but when inserted into the other two lock key ways, the key will not turn in either direction (will basically wiggle a millimeter or so in either direction, but does not start to actually turn).

I am a very amateurish lock picker—I can rake a basic lock or use a snap gun, but this lever/mortise lock is very different from anything I have tried to pick before.

I should mention that I used the working lock to confirm that the key fully inserts into the other two locks before attempting to turn the key.

I’ve tried looking up tools for picking this lock and watched some YouTube videos.

I am curious if anyone with experience picking this sort of lock might offer some advice on tools to get or improvise.

I’m including a photo of the key to help identify what might be needed.

Any advice is appreciated.

top 7 comments
sorted by: hot top controversial new old
[–] lfisk@infosec.exchange 4 points 1 year ago (1 children)

@Hux The key in the image appears to be for a warded lock. You can buy blank keys similar to that. For instance:

https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=blank+hollow+key

You may be able to remove some warding (could be necessary on either side of the key) and get a key to work.

Look up Skeleton Key Warding to learn more about this.

[–] Hux@lemmy.ml 1 points 1 year ago (1 children)

I measured the key and found a few good candidates on Amazon—we’ll see how it goes once I have them. Thanks!

[–] lfisk@infosec.exchange 1 points 1 year ago

@Hux In looking at the keys via AZ you'll notice the "notch" in the key changes positions by small amounts and sometimes to the opposite side. This is to work with different warding. It prevents the key from working in all the locks it might fit into🙂​

[–] D61@hexbear.net 2 points 1 year ago (2 children)

ooh.. gonna comment here to see if anybody has a good answer.

So the bottom finger of the key is probably doing the work of moving the bolt in the lock. I wonder how far my guess of "two tumblers" is from being correct?

Junk stores or hobby jewelry making shops might have the same style of keys for, probably not too much money. If the metal is fairly strong, you could try to find a key with the same size barrel and lever. File the lever part so that the opening is larger towards the barrel than your one working key and maybe get away with filing down the top part of the barrel to give yourself some space to get a pick in over the top. This modified key will be your torque wrench and a bent wire over the top to try to wiggle the tumblers.

If you can get the desk on its back or maybe flipped upside down that might help fight the springs (if there are any).

I went and looked at the internet for videos and found one here that made me think I was on the right track

Invidious link to a youtube video from Lock Noob: (093) Beginners Guide to Curtained Lever Locks and Lever Lock Picking

The lock in the video is way more complicated than a simple desk drawer but I'd imagine that the basics should be the same.

[–] Hux@lemmy.ml 2 points 1 year ago (1 children)

Thanks for the detailed reply, also that video is probably the best I’ve seen. Thanks!

[–] lfisk@infosec.exchange 1 points 1 year ago

@D61 @Hux
Jason has made several good videos for "furniture locks". This might be a good starter here:

https://www.youtube.com/watch?v=pPIHiIYSjW8