289

For all the CAD users out there (i.imgur.com)

submitted 1 year ago by cartmancarter@lemmy.world to c/memes@lemmy.ml

19 comments fedilink hide all child comments

Or really any professional software users

top 18 comments

sorted by: hot top controversial new old

[-] model_tar_gz@lemmy.world 13 points 1 year ago

As a ML/DL practitioner: it’s never my fucking fault; it’s always TensorFuck and PuTorch, fucking piece of shit softwares fail to converge my ass writes better fucking code in a backwoods truck stop toilet stall than this piece of shit; oh fuck right I need to just reduce the learning rate and yes I’m a fucking genius.

[-] greyscale@lemmy.sdf.org 7 points 1 year ago

I will never forgive Autodesk for what they did to EagleCAD.

Eagle, my beloved

[-] Unblended@kbin.social 6 points 1 year ago

I saw the writing on the wall a few years back, it was so painfully obvious. I started switching to KiCAD early, and feel so bad for ever recommending Eagle to people who will now have to learn yet another new tool in order to find something usable.

Fusion360 is so bad, I had to explain why SolidWorks was different earlier today and they were shocked by things like "if I move the case the board I say is attached to the case moves to" and "I don't have to align it by eye, it's a computer".

And I'm definitely not starting VMWare to run Fusion360 with nonsense online components that slow it down to uselessness and integrate it into a tool that doesn't need to be on at all... it's just not possible. It was obvious once they stopped updating the version. It's pathetic nonetheless that they cannot think beyond the one-true-way of integrating a dozen mediocre tools into one extra-mediocre product.

[-] the_itsb@midwest.social 6 points 1 year ago

This is a perfect rant in that it is so specific it loops back around to universality. I have no experience with any of the programs you mentioned - I'm only in the comments because I thought my husband, who uses SolidWorks sometimes in his day job, might find this thread entertaining - and yet I totally related to everything in your comment. I have felt all those same frustrations, just with different software; stuff that was perfectly fine getting "improved" to the point of uselessness for my situation.

You're a great writer! It takes skill to rant so well about niche stuff that anybody can relate.

[-] Scrath@feddit.de 3 points 1 year ago

Any recommendations on what to use beside Fusion? I hate that the files created in it are only stored in the cloud while I would like to use git for version management.

[-] cartmancarter@lemmy.world 4 points 1 year ago

I would say that if you use CAD at home as a hobby then F360 is the best because it is hard to beat free. If you want a little more, and a more familiar set up, then you can have SolidWorks a year for $100 as a hobbyist. Which isn’t a bad deal.

[-] Spritkopf@lemmy.world 1 points 1 year ago

I absolutely recommend FreeCad. It can be pretty hard to learn because it feels unfamiliar at first if you come from Inventor (Like me Back in the day). But it is FOSS and that alone is a big plus. Also it's pretty versatile, you can notl only do 3d CAD, but also architecture, structural Analysis (FEA), or CAM if you are into that sort of thing. Give it a try, and dont be discouraged by the steep learning curve!

[-] GoldenSpamfish@lemmy.world 2 points 1 year ago

They definitely just don't know how to use mate connectors. I don't prefer fusion over other CAD, but it's not that fundamentally flawed as you say.

[-] GoldenSpamfish@lemmy.world 7 points 1 year ago

After switching to onshape, I have had the true revelation that it was actually solidworks fault the whole time for doing multibody modelling in a bad way.

[-] otacon239@feddit.de 5 points 1 year ago

Any subs here on Lemmy that are about machining? Haven’t been able to find any so far…

[-] dandroid@dandroid.app 4 points 1 year ago

The reason I lost this video game match: 98% this game is bullshit. 2% I had him exactly where I wanted him, but pressed the wrong button.

[-] Tar_alcaran@lemmy.world 2 points 1 year ago

What, no cheaters?

[-] toroknos_07@sh.itjust.works 3 points 1 year ago

as much as i hate it, what am i gonna do?

stop using it?

probebly, the moment i finish my course

[-] BearJCC@lemmy.sdf.org 2 points 1 year ago

Sounds like we need a SolidWorks community

[-] TinyLightShow@lemmy.world 2 points 1 year ago

Solidworks user here. This is true.

[-] Skanky@lemmy.world 2 points 1 year ago

Been using SolidWorks for over 20 years.

This just isn't true any more. Is SolidWorks buggy? Sometimes, yeah. But with the right machine and knowing how to model things correctly, crashes are rare. Maybe once every couple of weeks - and I'm using it 6+ hours per day.

The reason SolidWorks gets a bad rap (mostly from Reddit) is because the majority of posters are students with shitty computers.

[-] BCsven@lemmy.ca 1 points 1 year ago

I had highend Dell workstation running NX, I thought I'd try SolidWorks. The SW installer crashed repeatedly, I called the local reseller support....they were like yeah sometimes it's just like that. lol. SW is OK but it is a mid level CAD product, and starts to breakdown when building in lots of automation. Solid Edge is a more robust mid level CAD tool.

[-] Khtkiller@lemmy.world 0 points 1 year ago* (last edited 1 year ago)

Deleted (Wrong place to post, sorry)

load more comments

this post was submitted on 18 Jul 2023

289 points (98.0% liked)

Memes

45535 readers

223 users here now

Rules:

Be civil and nice.
Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago

MODERATORS

gary_host_laptop@lemmy.ml

sexy_peach@feddit.de

cyclohexane@lemmy.ml

cypherpunks@lemmy.ml