371

Obscure screw added so appliance cannot be disassembled (lemmy.world)

submitted 7 months ago by an_onanist@lemmy.world to c/right2repair@discuss.tchncs.de

156 comments fedilink hide all child comments

Basic blender went bad (motor ran but spindle wasn't rotating). I wanted to disassemble to see if it could be repaired. Three of the four screws were Phillips head. I had to cut the casing open in order to discover why I couldn't unscrew the fourth. It was a slotted spanner.

you are viewing a single comment's thread
view the rest of the comments

[-] nilloc@discuss.tchncs.de 6 points 7 months ago

Here’s the link, it’s helped me out a bunch of times in the 6-8 years I’ve had it.

2 notes though

these are hard cheese grade metal. Don’t plan on removing any high torque, Rusty or partly stripped screws with them, they’ll either break or round off.
if the screw is too recesses down a narrow hole, these won’t help. The bit holders are too wide to fit in. I have a Honeywell Air Purifier with one security Torx that is 3-4” down a hole that this set failed me on.

[-] Godnroc@lemmy.world 1 points 7 months ago

Just to add to your comment, the sell a smaller set for a few dollars less and also a "precision" screwdriver set that has some similar bits not but the full set. Both are very handy to keep around for this exact thing.

this post was submitted on 15 May 2024

371 points (96.3% liked)

Right to Repair

1549 readers

88 users here now

Whether it be electronics, automobiles or medical equipment, the manufacturers should not be able to horde “oem” parts, render your stuff useless if you repair it with aftermarket parts, or hide schematics of their products.

I Fix It Repair Manifesto

Summary article from I Fix It

Summary video by Marques Brownlee

Great channel covering and advocating right to repair, Lewis Rossman

founded 1 year ago

MODERATORS

Engineer@discuss.tchncs.de