19
Making a PCB, using solder mask as etch resist. (discuss.tchncs.de)
submitted 7 months ago by Rolive@discuss.tchncs.de to c/askelectronics@discuss.tchncs.de
5 comments fedilink hide all child comments

This is an idea that entered my mind. The traditional way is applying some etch resist like toner or dry film, etching away the copper and then adding solder mask before populating the board with components.

Can the solder mask be used as etch resist instead? It feels like skipping an unnecessary step in the process. Why isn´t this more common? This way you won´t need the step of removing etch resist only to replace it with a slightly different compound.

you are viewing a single comment's thread
view the rest of the comments
[-] akacastor@lemmy.world 5 points 7 months ago

Adding solder mask is an optional step. If you use an etch resist like toner or dry film, you have a functional PCB even without solder mask. The solder mask is the unnecessary step that can be skipped.

Using solder mask as an etch resist, you would have to scrape away the remaining mask in areas where you want exposed pads - you would either need another mask for this, or to manually scrape each pad, adding an unnecessary step.

[-] Rolive@discuss.tchncs.de 1 points 7 months ago

That is a good point. I was under the impression that solder mask is mostly for safety and convenience when soldering so it only flows where you want it to.

Creating a mask that works for solder mask as etch resist does require some tweaking with the SVG files. I'll give it a try for a few small boards to see how well it really works.

this post was submitted on 06 Apr 2024
19 points (100.0% liked)

Ask Electronics

3173 readers
8 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago
MODERATORS
DavideAndrea@discuss.tchncs.de
linker3000@discuss.tchncs.de