22
What else can I do with this tear out?
(lemmy.dbzer0.com)
Hi there! I'm confused with this one... I've got these plywood squares that I had to drill a bunch of holes in. Despite using a low speed on my drill and adding masking tape (below) there's still pretty nasty tear out on nearly all holes. (EDIT: These are not through holes, this is for crochet square blocking boards. Metal rods which need to stay in place are put into the holes.)
And this is it after removing the masking tape.
What should I do? Thanks in advance!
Believe it or not these were made using a brad point bit. Others have mentioned the low budget quality + it becoming dull and I imagine that's a big cause. Thanks for the fisch recommendation, I have been looking and don't really know good brands for bits, so that's really helpful!