1204
submitted 10 months ago* (last edited 10 months ago) by OttoVonNoob@lemmy.ca to c/memes@lemmy.ml
you are viewing a single comment's thread
view the rest of the comments
[-] velvetThunder@lemmy.zip 53 points 10 months ago

I was living in a world where I wasn't aware that it's a thing to steal cables. Thanks. But aren't fiber optic more expensive?

[-] ridethisbike@lemmy.world 24 points 10 months ago* (last edited 10 months ago)

Probably, but I don't think you can easily melt it down and sell the raw materials like you can with metals... Just a hunch

[-] Caboose@lemmy.world 15 points 10 months ago

Fiber optic cables are very much not recyclable, at least with the current recycling technologies.

[-] reddithalation@sopuli.xyz 6 points 10 months ago

i mean its glass, could just melt it down

[-] xradeon@lemmy.one 17 points 10 months ago

Sure, but the glass core is only 8–9 µm wide, it's a minuscule amount of glass compared to copper cables so it's not really worth it to melt it down.

[-] Caboose@lemmy.world 10 points 9 months ago* (last edited 9 months ago)

Most optical fiber is 125um of glass with 250um coating. The coating and the jacketing that make up the cable (mostly non-recyclable plastic) are the real problem.

[-] xradeon@lemmy.one 1 points 9 months ago

I don't know of any fiber that the core is 125 microns. Can you link to one? Neither Single Mode nor Multi Mode fiber is that large.

[-] Caboose@lemmy.world 1 points 9 months ago

Sure: https://www.prysmiangroup.com/sites/default/files/business_markets/markets/downloads/datasheets/SMF---Single-Mode-Optical-Fiber-SSMF.pdf

You are right the core of most optical fibers is either 8-9um for singlemode, or 62.5 or 50um for multimode. The cladding, which is also made of glass, surrounds the core and this is almost always 125um. Often there is more than one layer that makes up the cladding glass to help reduce the bend radius before you start to attenuate your signal. You need both the core and the cladding of different refractive indexes to create total internal reflection, which is how fiber optics work over long distances with low loss.

The glass (core + clad) is the only part of the fiber that is really recyclable. Everything else is plastic that is difficult to chemically remove.

There's a lot of really bad literature out there on fiberoptics, so I don't really blame anyone for not knowing this stuff. Here's a pretty good article that sums up how fiberoptics work I pulled off google: https://www.ofsoptics.com/faq-guide-to-fiber-optic-cable/how-do-communications-fiber-optic-cables-work/

[-] lorty@lemmygrad.ml 3 points 10 months ago

What makes fiber optic useful is the fact that it is a very specific kind of glass.

[-] Strykker@programming.dev 3 points 9 months ago

But it's still dirt fucking cheap to produce.

The expensive parts of fibre are the transmitters/receivers at each end and the labour to splice/terminate it properly.

[-] Gabu@lemmy.world 2 points 9 months ago
[-] Caboose@lemmy.world 5 points 9 months ago

Some are complex, most aren't I'd say.

load more comments (8 replies)
load more comments (11 replies)
this post was submitted on 24 Nov 2023
1204 points (98.8% liked)

Memes

45179 readers
1539 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS