this post was submitted on 15 Oct 2026
591 points (96.8% liked)
science
29466 readers
394 users here now
A community to post scientific articles, news, and civil discussion.
dart board;; science bs
rule #1: be kind
founded 3 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Jesus, am I supposed to be doin all that shit after soldering with leaded solder? I just wash my hands with regular ass soap like I just pooped.
I don't when I solder. But I do use lead removal soap and/or wear gloves. Washing my hands after soldering doesn't take much time and I figure it's better safe than sorry.
The issue with shooting is rarely bullets, like people think, it's the primers. Most primers contain heavy metals that get blasted out into the air, which means you end up with a nice microscopic coating of the stuff on your skin and clothes. Touching lead probably isn't an amazing idea but won't do much unless you're, like, chewing on it. But microscopic particles are a different story.
They're blasted out the barrel, that shit is not going back at your face in any meaningful amount. That would be the worse design ever if hot gases came back into the face of the operator. The only real danger about aerosolized lead is if you're running a suppressor and in an indoor range with shit ventilation, and those are usually shut down pretty quickly. The fire Marshal will shut that shit down in a heartbeat if the ventilation is shit (unspent gunpowder is stupid flammable).
If you think 100% of the gasses from a primer strike shoot out of the end of your barrel and don't go anywhere else then I'm not sure what to tell you because that's just not the case. Or you're shooting some very bizarre guns.
Sure not 100% but it's going to be 99.99% of it. There is very little material in a primer in the first, and of that material only 40% of it is lead based. You're going to get more lead exposure from handling fishing weights made from lead than gas exposure of vapor from a primer.
I don't have hard data on how many microns or percents of primer heavy metals are ending up in my gas tube or on my clothes or hands. But from what I know it's a nonzero amount and I take precautions accordingly like I would for any nonzero amount of heavy metals. Lead is cumulative, so every tiny bit adds up over the years.
If you don't think that's an issue for you, then rock on my friend. Keep doing it the way you want.
I get more lead exposure from being outside in a city during a dusty day. On top of that, you can literally reduce your bodies ability to absorb lead by eating healthy foods with calcium or rich in iron.
https://www.canr.msu.edu/resources/fight_lead_with_nutrition
I'm a rural Texan so I'm pretty rarely in a city at all, much less on a dusty day.
But I didn't know about food combatting lead exposure, thanks for the link! I'll look into it.
I'm in a rural area as well, and I rarely go into the major city, so I know what you mean.
Yea if you like dairy it's a huge help. Same with some nice greens with loads of iron.
I usually use antibacterial hand soap but I'm gonna have to look into ass soap. /s
But not the fancy ass soap, just the regular!
I inherently use dumbass soap.
Oh sorry, I just deal in the fanciest of ass soaps. You want Clean That Butt on 3rd
Well you should be washing your hands, and using lead removal soap for washing probably wouldn't be a bad idea
But with soldering, unless you're doing something really wrong, you're not really going to be spraying lead around the room, to settle on your clothes and such and your soldering iron or even a standard blowtorch torch isn't anywhere near hot enough to vaporize lead, so inhalation isn't really a risk (to say nothing about fumes from your flux or whatever else you might end up burning, good ventilation is still a very good idea) and hopefully you're not soldering on any kind of food prep surfaces.
With shooting, there's a lot more risk of airborne particles and bullet fragments and such as well as fumes from lead based chemicals in the primers, so lead kind of gets everywhere.
Nah I only grind aluminum and plastic near my food prep station, I don't solder there.
No. There's a hysteria about lead recently, it's nuts. Surgeons leave bullets in people all the time.