Right to Repair

Hey, I've got a faulty oven here that won't heat up properly. The previous owner suspected a defective heating coil, but they are all functional. I tested it with an oven thermometer: if only bottom heat is on, the thermostat switches correctly and the oven heats up as it should. However, as soon as top heat is (also) on, it only heats up to about 80°C (144°F) below the target temperature.

The sensor is located directly behind the upper coil, so it doesn't seem too far-fetched that it switches sooner in this case, but 80 degrees too early? It has been working for the past 12 years... In YouTube videos, a faulty thermostat seems to cause the stove to heat non-stop.

Any idea on how I can fix this? I don't want to buy a spare part only for the problem to persist in the end.

Edit: This is about an IKEA FRAMTID OV9 featuring an EGO 55.17253.120.

cross-posted from: https://lemmy.zip/post/29515358

A subscription anti-theft feature that should be free.

The auto industry’s commitment to right to repair is being tested.

You've dropped your phone and the screen shattered. Now you're facing a costly repair until you can get a new phone. Swapping out one piece of glass or a button doesn't seem like it should be that expensive. Why does it cost so much to fix your stuff?

Today, we at SFC, along with our OpenWrt member project, announce the production release of the OpenWrt One. This is the first wireless Internet router designed and built with your software freedom and right to repair in mind. The OpenWrt One will never be locked down and is forever unbrickable. This device services your needs as its owner and user. Everyone deserves control of their computing. The OpenWrt One takes a great first step toward bringing software rights to your home: you can control your own network with the software of your choice, and ensure your right to change, modify, and repair it as you like.

Ironic video by fairphone reminding is that electronics should be repairable like bikes are... Or aren't they?

A recent article by ifixit highlighting how bikes are getting less and less reparabile too!

https://www.ifixit.com/News/101675/bike-manufacturers-are-making-bikes-less-repairable

John Deere is costing American farmers $4.2 billion a year by restricting them from fixing their own tractors. Apple, Amazon and major automakers use the same strategies on everything you own. It's bad for consumers and local mechanics, but excellent for corporate profits.

cross-posted from: https://slrpnk.net/post/15232893

Hey all.

Sorry if this isn't the place to ask, but this appears to be the community best suited for this kind of question from what I can gather.

I recently bought a breadmaker at the thrift shop for cheap. While I initially was worried that it didn't work as intended when the piece that would turn the kneading paddle didn't move from the start as expected, I found a video for another breadmaker in the same product series, and discovered that it simply takes some time to start the kneading portion as it undergoes a pre-heat step beforehand.

While I've tested and seen that the breadmaker itself works, the one thing preventing me from operating it is the fact that it lacks a kneading paddle. This is the first time I've purchased a breadmaker, and as such, I'm a little lost as to how to get my breadmaker operating as intended with a new paddle. I would order from the manufacturer, though the issue with that is that my model breadmaker is fairly old, with the instructional video for it having been ripped from VHS and dated as being from 2000.

I do not want to throw this thing out. I would much rather get a new paddle as this thing seems to work like a charm 24 years later, and I am trying to be more environmentally conscious by purchasing second-hand goods as well as minimizing the amount that I throw out.

Unsure if it will do anything to help, but the model breadmaker is a Black & Decker All-In-One-Deluxe Automatic Breadmaker, Cat.No. B1640, Type 1. Any and all help is appreciated in advance.

I’m planning to buy my first car, but I’m seeing a lot of brands implementing policies that seem to take advantage of their customers. Things like requiring extra subscriptions for basic features, tracking driving habits, and forcing unnecessary data collection have me worried. Are there any car brands out there that don’t engage in these types of anti-consumer practices? I’m looking for a reliable company that respects its customers in the long run. Any advice would be appreciated!

Warren recently sent a letter to John Deere CEO John May, asserting that the company is "evading" its obligations to comply with federal laws and respect customers' rights. According to Warren, John Deere is failing to provide farmers with the necessary tools to properly repair their agricultural equipment and is allegedly violating the Clean Air Act in the process.

cross-posted from: https://discuss.tchncs.de/post/22922783

Does anyone know of a mouse that can be used wireless, with a replaceable battery and that can be connected to the PC via USB-C to recharge the battery? Obtainable in Europe.

The reasoning is that I do not want to get into the situation where I do not have a charged replacement battery at hand and am therefore unable to use the mouse.

Currently I am using a mouse without a replaceable battery which got so old that the battery only holds for 1-2 hours without being connected to the cable.

I know I could simply go with a wired mouse, however, I like the cleanliness of minimal cables on my desk. Thanks for suggestions.

cross-posted from: https://discuss.tchncs.de/post/22378382

Following today's launch of the new iPhone 16 models, Apple has shared repair manuals for the iPhone 16, the iPhone 16 Plus, the iPhone 16 Pro, and the iPhone 16 Pro Max. The repair manuals provide technical instructions on replacing genuine Apple parts in the ‌iPhone 16‌ models, and Apple says the information is intended for "individual technicians" that have the "knowledge, experience, and tools" that are necessary to repair electronic devices.

Last March Oregon became the seventh state to pass “right to repair” legislation making it easier, cheaper, and more convenient to repair technology you own. The bill’s passage came on the heels of legislation passed in Massachusetts (in 2012 and 2020), Colorado (in 2022 and 2023), New York (2023), Minnesota, Maine and California. All told, 30 states are considering such bills in 2024.

I stripped this screw in my laptop and as such can't open the back cover to replace parts.

Things I've tried: -Different size/type screwdrivers -Rubber band -Hammer -Hot glue gun

Edit: got it unsuck. Thanks everyone for the advice

EDIT: I believe I found the answer, it's something turned by this: https://ctatools.com/products/5065

Found some trash on the street that i'd like to take apart, but this screw is in my way.

It's like a hex bolt, but with 5 sides, and rounded (a bit like flower petals).

Here's another picture from the top:

I tried turning it with various tools (hard to get pliars in unfortunately), no success so far. The material is very soft, which doesn't help..

It turned out really nice. Looks like the void extended our wrench a bit, but I think that's fine, it kind of looks like lightning.

Thanks to @krusty@feddit.it, @coke38@lemmy.world, @Deebster@programming.dev, @Ethanol@pawb.social, and @user224@lemmy.sdf.org for helping, and thanks to anyone else I missed.

Edit 3: I've got a base down now, here's link if you can help out. https://canvas.fediverse.events/#x=819&y=76&zoom=8&tu=https%3A%2F%2Fmiro.medium.com%2Fv2%2Fresize%3Afit%3A750%2Fformat%3Awebp%2F1*edo5pVW4hzkNw0s6JCAdMw.jpeg&tw=55&tx=788&ty=55&ts=ONE_TO_ONE

Lemmy canvas is live, would we like to try and build something? The right to repair logo would be cool, but I don't know how well it'd show up as pixel art.

https://canvas.fediverse.events/?a

He's the logo link https://miro.medium.com/v2/resize:fit:750/format:webp/1*edo5pVW4hzkNw0s6JCAdMw.jpeg

Maybe we could go close to solarpunk on the middle left? They seem close thematically.

Edit: here's a location I think will work well, just south west of solarpunk. https://miro.medium.com/v2/resize:fit:750/format:webp/1*edo5pVW4hzkNw0s6JCAdMw.jpeg ~~Width=55 x=80 y=209~~ see below You can use the template by clicking on setting on the canvas.

Edit 2: I'm looking for a new location

Let's try width=55 x=788 y=55, I'm working on outlining it.

Hi,

I got an old DVR that I would like to use.

Unfortunately on the device itself, no brand, no model name !?

Any idea how can I find any documentation ?

Thanks.

I have a Pixel 4a (with Calyx) for a few years already (start of 2021) and it's still going great. The battery is okay. Everything works nice. It's smooth. It runs everything perfectly fine.

This makes me glad to see that hardware wise this phone was really built to last, I can't even count how many times I dropped it so hard that I was scared to see the damage (which was always either nothing or a broken screen protector)

But software wise I'm screwed as security updates are already gone from Google and I only get the extended support from Calyx which will also end soon.

Now I'm forced to choose between having a phone that is insecure or buying a new one.

So thanks Google for the high quality hardware, but what's up with this software planned obsolescence??

I know this isn't exactly right to repair, but it also kind of is because if Google decided to ditch the 4a, they should be forced to open source the software so that the public can actually repair it.

I'm sure that some of their latest updates can be modified slightly to work for the 4a, but they don't care and for them this is a win-win since they don't have to maintian support and they get new customers who would otherwise be satisfied with an "old" phone.

What happened to the days when an old phone meant a phone that was already crumbling to pieces, and not a fully functional computer that is slightly older then a toddler?

'The car companies want to put small guy out of business.'

A leaked "independent" repair shop contract shows that Samsung requires them to give Samsung the name, contact information, phone identifier, and customer complaint details of everyone who gets their phone repaired at these shops,

Stunningly, it also requires these nominally independent shops to “immediately disassemble” any phones that customers have brought them that have been previously repaired with aftermarket or third-party parts and to “immediately notify” Samsung

It's the second in a row news about Samsung acting agsunst the customers right to repair, showing how much we need good right to repair laws.