Let me raise a side concern here since the core questions already seems to be answered; reconsider the Nvidia GPUs. Depending on what you do, you might encounter significant shortcomings at the moment since they do not play perfectly with Wayland yet (which is clearly the future). So do some research in this direction first before you pull the trigger.
x3i
joined 2 years ago
Would love to know if this is better at Tidal than at Spotify. After all, that is the main reason I switched.
I say this time and time again; only listen to people regarding their field of authority. For anything outside the world of software, Stallman's opinions should not be seen any more valid or important than any other person on the internet. We should stick to that more. (What happened/happens due to his position in the FSF is a different topic)
You can run lineageOS on it though; problem solved
Okay, fair point, so it is relevant for a current issue
This article is from July 2021. Why exactly are you sharing this?
Are you sure you installed all the drivers from https://www.dell.com/support/home/en-ie/product-support/product/optiplex-3060-desktop/drivers ?
This is one of the reasons why I am very unsure about the whole archinstall thing. On the one hand, it lowers the barrier of entry for less techy people, which is always good. On the other hand, it allows for installing the OS without ever having to use the archwiki, which leads to people making a blog post like this that could be solved by looking for "bluetooth" in the archwiki and following the instructions. To somebody not familiar with the OS, this makes it seem like arch is much more complicated than it actually is. "To run arch, you have to hope that there is a blog post or youtube video for simple things like bluetooth!"
No, you simply go here: https://wiki.archlinux.org/ (Also very useful resource if you are on any other distro btw)
Not at all, Windows 10 and beyond identify your hardware composition, so as long as you don't swap the mainboard, the license is automatically applied again upon internet connection (assuming you install the same windows version and do not enter another license key during installation). If you want to transfer your data though, get a cheap external USB HDD enclosure and use clonezilla to clone the drive. Edit: typos
Sorry, saw the reply just now. I use Wayland pretty much exclusively since I switched all my devices to Linix roughly three years ago and I face no issues. Afaik sway is fully compatible with i3 config, so I assume your gestures should just work the same. Hyprland is a different beast, it is still pre-release, so while the state is impressive, do not expect super advanced niche features like gestures (check their wiki to see if they are supported). I don't use an OSK, whenever I fold, I pretty much use only xournal++ which I navigate with pen and touch. However, there is at least one that I tinkered with some months ago and it worked, I cannot remember the name though (probably got it from the arch wiki). Lid switch detection works well in sway, so I assume configuration for it to come up automatically should be trivial. Again, definitely try sway first, this should give you the best experience. Hope it helps!
I'm not very familiar woth Tailscale but the procedure should be as simple as making sure all the traffic runs through the same exit node. Be aware that this might severely strain the upload of that exit node device bit from a technical point of view, it should work. Wait for someone that actually uses Tailscale to respond with details :) Edit: are you running tailscale on the machine that accesses netflix or on a router?
No worries, started riding last year, fell twice during that season. Is a normal thing when you start out :)
One importantl thing: get boots with crush protection. Not crazy like enduro boots but sth resistant. I hurt my ankle at the second tip-over and could not ride for four weeks, very avoidable!