[-] SailorsLife@lemmy.world 2 points 1 day ago

Budget is really more about value than anything, I have money to spend, but I don't like to overspend or waste. Otherwise there are things I know, and things I don't. :) I do know linux, and some docker. I have built a few pc's over the years. But I don't really keep up with hardware stuff. The idea to have a NUC and a NAS just came from what I was reading as it seemed to be what people do. And the plan was to get a pre-built NAS and a mini pc. That way the whole project doesn't get so big it is overwhelming. The software stuff can be complicated from what I read. But I work in software, and I could use more time with docker and such. I was pricing things out when I got thinking about the connection between them, and thus how many ethernet ports I needed on the minipc. It sounds like people are saying that network speeds through a switch should be more than fast enough. I know this is probably the more expensive route, but I think the total cost may be at least reasonable. The minipc is like $169. Seems like the NAS is like $500. And a few hundred for drives. So maybe under a k. The way prices are these days, that doesn't feel terrible. But I don't really have a scope on costs for hardware.

[-] SailorsLife@lemmy.world 2 points 4 days ago

Can you elaborate on why you wouldn't recommend it for someone just starting out?

[-] SailorsLife@lemmy.world 1 points 4 days ago

Well, mainly it is just what I read in various "guides". But also it sounds easier to assemble... the minipc is just a box, no need to do any hardware stuff. And I think the NAS is pretty much the same. Plus it would allow me to easily start small on space and then add more (I think).

Also, I think it would be quieter. I assume putting it all in one would mean basically a tower with lots of fans and what not. The minipc is supposed to be pretty quiet. Don't know about the NAS though.

[-] SailorsLife@lemmy.world 2 points 5 days ago

yeah, I am totally with you. For the media server, I just don't know how much money I want to put into backing it up. For the important stuff. I really wish I knew of an offsite backup that I felt like I could trust. But most business models' these days seem to be hinged on hoping nothing ever goes wrong... or just paying if it does.

[-] SailorsLife@lemmy.world 1 points 5 days ago

I thought there was a raid setting where it basically duplicated the data across the drives such that if any one of them fail it can recreate the data. That should at least cover the "local" backup part. For more important things like family videos and such I have external drives that are offline unless I am uploading new videos and such. But really I should have some kind of offsite backup for that kind of stuff.

[-] SailorsLife@lemmy.world 1 points 5 days ago

ok, I see. So network is fast enough. That works for me. The miniPC only has 500gb. So that is why I figure I need the extra storage. As for a backup, I figured I would have to raid it. The only other option I can think of would be to run a second NAS or something. And that seems like overkill.

17
submitted 5 days ago* (last edited 4 days ago) by SailorsLife@lemmy.world to c/jellyfin@lemmy.ml

So my plan based on reading was to get a mini pc and a nas. But then I realized... what is the best way to connect them. So I started doing more reading. And I confused myself.

So a NAS has it's own CPU and such, and other computers can talk directly to it over the network. But if I am using a mini pc to run the server, then I assume I would want a really fast direct connection to the storage. So it seems like I would want the NAS to be on the network as well as directly connected to the mini PC. And of course the mini pc would need to be on the network as well. Stuff I saw about connecting them directly seemed to pretty much use the Ethernet ports and a crossover cable. So that would mean that both devices would have to have two Ethernet ports, right?

And the bonus question is, would it just be better for the NAS to really be a dumb DAS for the mini pc instead?

Edit to summarize: For having two devices, the consensus is that LAN is good enough (just make sure you have a decent switch between them). A few like doing it all on one device for a variety of reasons.

15

So I am finally going to get around to setting up a dedicated media server with network storage and all that. I have previously read up and decided on this Beelink Mini S12 PC. But I have heard about lots of problems with some of the latest intel chips and such. Does that affect this mini pc?

And since it has been nearly a year, is that still the best idea for a media server? I mostly want it to be quite since it is always on, and I don't want to hear it down the hall in my bedroom at night like my current windows pc. But outside of that, whatever works best. It seems pretty inexpensive compared to what I was expecting.

61

I have jellyfin with the radarr/sonarr/prowlarr combo going. I can "heart" things in jellyfin. But it's recommendations are only things I already have downloaded. I see discovery in radarr, but no way to tell it if the movies I downloaded were good or bad. So I must be missing something.

38

I downloaded the movie ISS. It has some add for a website overlaid on top of the movie, and even ads in the middle. Is there a way to report it or something. I couldn't even get qbittorrent to tell me where it came from.

[-] SailorsLife@lemmy.world 4 points 10 months ago

Thanks to @Shadow@lemmy.ca and @Lem453@lemmy.ca Windows event viewer put me on the right path. The errors were coming from the .net installation. Which reminded me that I had recently uninstalled visual studio, and that jellyfin uses .net. Rerunning the jellyfin installer fixed the .net issue and I am up and running again.

[-] SailorsLife@lemmy.world 2 points 10 months ago

Thanks, that had info I could work with.

[-] SailorsLife@lemmy.world 3 points 10 months ago

Winner winner chicken dinner. It's been a few years since I had to do any real debugging on windows and I totally forgot about the event viewer. Thanks for the tip.

For anyone reading along, looks like there is a problem with my .net installation. That is probably because I uninstalled visual studio recently. It "shouldn't" have caused an issue, but M$....

13
submitted 10 months ago by SailorsLife@lemmy.world to c/jellyfin@lemmy.ml

I have jellyfin running on window 11. Things were working fine. Then yesterday my monitor stopped turning off after 15 minutes like it should. This happens every few months or so. So I rebooted, which often fixes it. When I did, jellyfin won't work anymore. I start it manually. So I click to start it, I see it show up in my taskbar on the far right, then go away. When I click on the up arrow, I can see the jellyfin icon, until I mouse over it. Then it goes away. So clearly it is crashing...

I went to the log dir, and the log file isn't updating when I launch. And the last entries are pretty mundane as well as before it started crashing.

I tried running the same command the icon was running in a cmd window, (Jellyfin.Windows.Tray.exe), and it did the same thing but no output like I was hoping. Tried adding a help arg... nothing.

Tried rebooting again of course. No luck.

So any ideas on how to debug this?

[-] SailorsLife@lemmy.world 3 points 10 months ago

Mine doesn't handle forced subtitles right or something. But I haven't started trying to tweak it yet. But when I watch like "invasion". It struggles during the Japanese scenes. The subtitles get out of sync and then eventually stop showing up all in one episode. Someone else mentioned something that might be the same and a trick for it that I will try soon.

7
submitted 10 months ago by SailorsLife@lemmy.world to c/jellyfin@lemmy.ml

I am pretty new at all this. But I got jellyfin and such setup on my window box. I have a roku client and all that working. So now it is time to look into a standalone box to run 24/7. But I don't know what specs matter.

I have read that I need at least a 6th gen intel i7 or i5 to take advantage of a feature that helps with this sort of thing.

But outside of that. Does ram matter? How much of a drive do I need on the box? (Going to get a NAS for real storage). Any other specs that matter? I am hoping to go fanless (not because I know anything, but cause I want it to be silent), is that ok? And which flavor of linux is the most popular?

53

I am sure I am just missing something simple... I have prowlarr -> sonarr/radarr -> qbittorrent -> jellyfin I created three directories. /jelly/video /sonarr /radarr. I configured sonarr and radar to use their respective directories. And I configured qbittorrent to use /jelly/video as the default download dir.

But what seems to be happening is that if I download a movie, it ends up in both /radarr and /jelly/video. And then if I delete it from /jelly/video it doesn't seed for others.

What am I missing here?

[-] SailorsLife@lemmy.world 2 points 11 months ago

Most people point out I am not worth their effort to trace for a few movies. But I am curious, if say I use a specific browser when on the vpn and only use a few very specific accounts like this one which I don't use when I am off the vpn. How do they identify me.

51

I have read some stuff about how if you are logged into like your google account while on your VPN you have pretty much given yourself away.

So first, is that accurate?

I just got a mullvad vpn and am using their browser. Created a new lemmy account. And I shut down my other browsers before connecting to the vpn to be on the safe side. Is that necessary? Anything else I need to do to sail the high seas anonymously and safely. I am looking to start finding all the movies that never seem to be on my many streaming services, but want to be safe about it. Thanks

view more: next ›

SailorsLife

joined 11 months ago