I'm using Thunder, which is far from feature complete.

Is he cosplaying Terry Crews in Idiocracy?

Thank you for this great service to the community.

FDM? It looks fantastic.

Pour que no dos?

Happened to me upgrading.

Best case scenario. As optimistic as I am about Lemmy, Reddit have a massive history which is going to suck to lose when it inevitably implodes like a submarine visiting the Titanic.

I was more thinking that if France were to be cut off from the rest of the internet, many lemmy instances could be brought up and communicate with one another.

Underextrusion. You probably have burnt filament clogging your nozzle. Get your nozzle to 80C, then set it to 150C and start pulling the filament back out as the temperature climbs. It's called a cold pull and usually clears this sort of thing.

Set your initial builtplate temp to 70, and the builtplate temp to 55 for printing. At 70 the pla will hit glass transition, then when it cools to 55 the adherence will be very good.

If you want smooth walls, slow the speed to like 40mmps, and squish the layers down to 0.10 mm with a .4mm nozzle if you can.

Play with ironing for the top surface smoothing.

I don't recommend reducing your cooling much with pla. Maybe down to like 50% at the lowest.

Edit: your nozzle and later height should be fine, I glossed over that. Bring the nozzle down to 200 or so.