Imagine Montréal<->New York in 2h instead of 11h... We could go there the morning like leave at 6AM from Montreal and be in NYC at 8AM, spend the day there, and go back at like 10PM
Is this 11-hour figure based on driving or some type of train that already exists?
There is a train, it's 10 hours. And by car it's 6 hours..
High speed rail goes faster than traditional rail
The clue is in the name, see!
In related news, I'm never going by Nonstop Testicular Torsion Rail again no matter how cheap the tickets are.
Canada is actually making bank because their pacific nw to midwest rail system is better than US ports so a publicly owned mixed traffic route from WA or OR to the great lakes is needed to compete with canada for shipping traffic.
“I guess crossing the Rocky Mountains is impossible”
-OP
For high-speed rail? Basically, yes. Unless you're into spending a couple million bucks per mile to rip out big chunks of the mountain. High speed rail can't reasonably navigate tight turns or steep grades.
I’m inclined to believe you, and have to say I love to see discussion like this here on lemmy’s version of fuckcars, but curious, does anyone know what switzerland does? Afaik, they have tons of rail and tons of mountains. Is it all/mostly low-speed? Sorry if it’s a dumb question or easy to answer.
I also love that this community is picking up some discussions so very much thanks to @Fried_out_Kombi!
As I live in Germany, directly at the swiss border I may be able to give some insight. The West of Switzerland is quite flat in comparison to the rest, so a lot of south/north traffic goes there. Also a lot of cargo trains. (Funfact, there is a project ongoing to make the north south cargo route more useable. Renew and expand the railways. Swiss has done its part years ago but Germany has not even started)
But as he said, there are also quite some HSR lines through the alps. The swiss people are pretty good in building them, but yeah its mostly possible due to the high population density in Europe. There are also quite some slow trains in switzerland but the view is always incredible so I don't mind to much.
So yeah I think its probably not feasible to do the same in the US. At least as long we don't invent magical new tunnel construction
The car centric infra is one of the things that might do the states in at some point unless power production and storage and raw materials is resolved
I love the Buffalo to Mexico City line
I think you would need an east-west line further north - perhaps continue west from Omaha or Denver - to make east coast to west coast travel practical.
IIRC I clocked that NY-LA line at something like 14 hours with medium HSR and down to 10 with the newest shit that can run on steel. In either case it's plenty fast for a sleeper train. There's also a pre-existing corridor, and, most importantly, massive population centres: A sleeper each direction each day won't nearly be enough to cover demand but that's no biggie you can spread them out and e.g. have people get up or start sleeping at Huston (allowing them to get on and off) or let them sleep through the whole of Texas. That's already three trains each giving the passengers even more possibilities.
You probably want to close the middle traverse from Colorado to Oregon and then connect to whatever the Canadians are doing east-west, but that doesn't mean that the southern corridor doesn't make sense in isolation.
NY to LA will never be 14 hours with current or near future technology. Its 50 hours from Chicago to LA with the slow trains and while high speed rail is a significant improvement its not crazy enough to get speed increases like that.
About 4500 km on current roads, that's at least in the right ballpark for rail. The currently highest-rated rail route is in China, 350km/h, that's 12.8 hours. Canada is currently building to that spec. TGVs can go 574.8 km/h (yes, on steel), that'd be 7.8 hours... 10 hours would be a mere 450km/h, I think that's perfectly doable in ordinary service, on steel, if you have the will. A bit faster than a Bugatti Veyron why is that so hard to believe steel has quite some advantages over rubber on asphalt.
That assumes the train is traveling at its maximum speed for the entire duration of the trip-- which is almost never the case, even in China. For a route that long with many many stops large portions running over rough terrain necessitating curves and grade changes the actual average speed along the route would certainly mean the average speed of the route would be much slower.
Ultimately, spending a tremendous amount of money embarking on an ultra-high speed rail route between the coasts-- which would certainly be one of the most ambitious infrastructure projects in human history-- would be a waste of time and money compared to almost any other rail project. All that money would be much better spent on high speed rail where it actually makes sense, and on conventional rail connecting every city in the US.
Night trains don't tend to have many stops, less than ordinary HSR ones. And really all that empty space in the US should lead to the average speed being quite a bit higher compared to maximum when compared to Europe. But, all that said, don't nail me on the details. Even if it's a 16 hour trip, there'd still be plenty of people who would be interested.
And then, well, LA-Huston and NY-Huston make sense independently so the track is already there.
and on conventional rail connecting every city in the US.
Bombardier Talent 3's are technically HSR, given that they max out at 200km/h. Tracks and rolling stock supporting on the order of 150km/h aren't a rarity for S-Bahn systems, here, that's more like commuter rail. Meanwhile, Amtrak is running trains over vast sections at more like 50km/h because the track is so shoddy you can't go any faster. (That's a sensible average speed for subway systems...) Those vast sections have to be rebuilt, anyway, and while you're at it you can just as well build them to higher standards as the cost increase is almost negligible compared to what building non-shoddy track costs.
Maybe Seattle->Spokane, Spokane->Boise->SLC->Denver, Spokane->Minneapolis.
I think there also needs to be more in Canada, Vancouver->Calgary->Winnipeg->Toronto.
Transit shouldn't be profitable... But the cost to build an HSR rail (which costs more than traditional rail) that went that distance vs ridership that a Vancouver to Toronto line would see to recoup some of that cost would make it a really tough sell to tax payers.
It's different in the US with 10x population.
Edmonton-Calgary LOL
Just saw it once you said it haha
Question? Why can't the silent majority start pushing these endeavors?
FL has bright line But I'm unaware of other HSR in the states.
Bright line is also expensive ($80ish for Miami to Orlando) and has caused a number of accidents so far…
agreed but still cheaper than driving? plus its new, as ridership increases prices will drop
No not cheaper than driving.... it's $80 per person, per direction.
especially if you have more than one person in your party.
Gas for the round trip is about $50
Why aren't there connections to those states in north west of the map?
I tried to keep it semi-realistic. There's a ton of mountains and very few people east of the Cascades. Regular non-HSR trains would still run there. HSR can't handle nearly as sharp turns or nearly as steep gradients, so building HSR through mountains gets crazy expensive crazy fast. Without population density to support it, it'd probably be a boondoggle to build HSR there. Plus, the vast majority of travel is regional, so most trips in the PNW would be served quiet adequately by having that West Coast HSR line.
Of course, if the goal were to completely replace airplanes and demolish the interstate system, then HSR might make more sense.
Fuck Cars
A place to discuss problems of car centric infrastructure or how it hurts us all. Let's explore the bad world of Cars!
Rules
1. Be Civil
You may not agree on ideas, but please do not be needlessly rude or insulting to other people in this community.
2. No hate speech
Don't discriminate or disparage people on the basis of sex, gender, race, ethnicity, nationality, religion, or sexuality.
3. Don't harass people
Don't follow people you disagree with into multiple threads or into PMs to insult, disparage, or otherwise attack them. And certainly don't doxx any non-public figures.
4. Stay on topic
This community is about cars, their externalities in society, car-dependency, and solutions to these.
5. No reposts
Do not repost content that has already been posted in this community.
Moderator discretion will be used to judge reports with regard to the above rules.
Posting Guidelines
In the absence of a flair system on lemmy yet, let’s try to make it easier to scan through posts by type in here by using tags:
- [meta] for discussions/suggestions about this community itself
- [article] for news articles
- [blog] for any blog-style content
- [video] for video resources
- [academic] for academic studies and sources
- [discussion] for text post questions, rants, and/or discussions
- [meme] for memes
- [image] for any non-meme images
- [misc] for anything that doesn’t fall cleanly into any of the other categories