this post was submitted on 22 Aug 2025
8 points (90.0% liked)

Mechanical Keyboards

11338 readers
12 users here now

Are you addicted to the clicking sounds of your beautiful and impressive mechanical keyboard?
If so, this community is for you!

Here you can discuss everything about mechanical keyboards (and only mechanical keyboards).

Banner by Jay Zhang on Unsplash

founded 5 years ago
8
ISO TKL keyboards? (lemmy.world)
submitted 1 week ago* (last edited 6 days ago) by Antaeus@lemmy.world to c/mechanicalkeyboards@lemmy.ml
16 comments fedilink hide all child comments
 

Hi fediverse.

I am searching for an ISO TKL barebones kit, and so far have come up short. I have found the following: nuphy gem80 (which is out of production and they confirm that a new batch is not in plans). Evo80, which seems to be a bit pricier and out of stock. Luminkey80, seems to not support nkey rollover, so I might be better off using my Model M keyboard.

Am I correct that no keyboard with modern comforts like proper layer dampening, hotswap, gasket mount exist in ISO and in TKL?

EDIT: I already own keychron and ducky, but I would like to have a keyboard where it ticks all the boxes. Like the ones I made as examples in the beginning (gem80, evo80, luminkey80)

Thank you in advance.

EDIT 2: I chose a Neo80 from monacokeys. Thank you for the dialogue, guys!

top 16 comments
sorted by: hot top controversial new old
[–] taaz@biglemmowski.win 9 points 1 week ago (1 children)

keychron? most of their kbs can be ordered barebones

[–] Antaeus@lemmy.world 3 points 1 week ago

Thank you. I was hoping for something in an higher end. Already have a couple of keychains and Ducky.

Apologies, obviously I failed to mention that.

[–] ominouslemon@sh.itjust.works 2 points 1 week ago (1 children)

MonsGeek has some ISO keyboard kits! Their website is kinda confusing but you can easily find them on AliExpress

[–] Antaeus@lemmy.world 1 points 1 week ago (1 children)

The 75%M1 is the only that checks by boxes besides the fact it’s not TKL 😕

[–] ominouslemon@sh.itjust.works 1 points 1 week ago (1 children)

I've just remembered that Pulsar also sells ISO TKL keebs, I think those might check all of your boxes. There is a Hall Effect one and a traditional mechanical one

[–] Antaeus@lemmy.world 1 points 6 days ago (1 children)

I had a pulsar. It was a fine board with good acoustics, it wasn’t gasket mount though.

I will check them out again.

[–] ominouslemon@sh.itjust.works 1 points 6 days ago

The current ones are gasket-mounted

[–] doeknius_gloek@discuss.tchncs.de 2 points 1 week ago* (last edited 1 week ago) (2 children)

I recently got myself a Keychron V3 Max with ISO TKL, which has hotswappable switches and a gasket mount.

EDIT: Keebfinder is nice to get a good overview.

[–] Antaeus@lemmy.world 1 points 1 week ago

Besides keychron and Akko I can’t find anything “higher end”.

[–] Antaeus@lemmy.world 1 points 1 week ago

I went through the list with all the suppliers in Europe, but again all the boards I would want are out of stock ☹️

[–] exu@feditown.com 2 points 1 week ago (1 children)

The GMMK TKL has hotswap, not sure about the rest.

[–] Antaeus@lemmy.world 1 points 1 week ago

Tray mount :(

[–] Ghoelian@piefed.social 1 points 1 week ago (1 children)

but I would like to have a keyboard where it ticks all the boxes

What boxes? Because keychron has keyboards with layer dampening, hotswap, and gasket mounts. What else are you looking for?

[–] Antaeus@lemmy.world 1 points 1 week ago

I understand your question. I have a V3 (no gasket, ABS plastic) and a C3 Pro (cheap but gasket). Perhaps I am an addict, but I would like to try that “high end thing” that the ANSI market offers. Aluminium case. POM plate. Poron dampening. I hope it makes sense

[–] neverpanic@chaos.social 0 points 1 week ago (1 children)

@Antaeus the Neo80 can be built with ISO layout and should tick all boxes except RGB.

[–] Antaeus@lemmy.world 1 points 6 days ago

Good thing I don’t care much about RGB. I hope it’s VIA. Compatible.

Thanks!