A place to share screenshots of Microblog posts, whether from Mastodon, tumblr, ~~Twitter~~ X, KBin, Threads or elsewhere.
Created as an evolution of White People Twitter and other tweet-capture subreddits.
Rules:
Related communities:
So if you just wiped it out with a paper towel, how many years do you think one could go before getting actually sick? I'll volunteer to be a test subject if I find a cheap cast iron. Apparently I'm supposed to get away from my non stick pans anyways
Not a scientist, but most microbes can't live in pure oil or grease. So If you get the food bits out, the oil itself will go rancid and taste awful before becoming actually dangerous.
It's not the microbes themselves but the toxins they release when they die
Tetanus, botulism, Staph. They're not bacteria itself but the leftover when bacteria die. So those toxins can build up on surfaces if not cleaned.
99% of all the old "don't wash cast iron!" shit you hear is antiquated information from back in the day when they used lye for soap.
There is absolutely no reason today to not wash your cast iron today. That doesnt mean you always have to, though. Often just wiping it out with a damp rag is more than enough, and if you have a lot of really stuck on shit.. You can scrub it with a slurry made up of salt, water, and soap (Make sure you use little water so the salt doesnt dissolve into the water and disappear). The salt will provide some abrasive scrubbing without damaging the cure.
outside of that, again, if you choose to, you can absolutely wash it. Warm water and soap, dry it off, put it on a hot burner for a bit to dry off any remaining water.. and if you are using it again tomorrow, you're done. If you're not gonna use it for a while, then a very very light coat of oil would be wise until you use it next time.
and just in case anyone wants a good way to cure.. I cover my cast iron in a thin layer of lard, and put it on a rocket hot grill, and leave it until it stops smoking. then i take it off, let it sit until i can handle it again.. put another coat of lard on, and repeat. a couple coats should give you a great starting base to build your cure up from.. and its not something you have to do often unless you really abuse your cast iron.
I cleaned a cast iron pan over the weekend. "Oven cleaner" the voices on YouTube said. In reality I needed an angle grinder and it took me the better part of 3 hours to do. My pan had some kind of matt black factory "seasoning" that was definitely not just oil and it took that long to chip it all off. Anyway pan is back in action now.
As an addendum I think the "seasoning" was some kind of matt black enamel layer on the inside of the pan. I wouldn't have touched it but even in regular use flakes detached and I had about 6 divots in the pan because of it. Oven cleaner did nothing to remove this layer so I used by angle grinder and a sanding attachment. It was painfully slow (my grinder is cordless and needs recharging) but I cleaned it eventually. Once I was down to bare metal I cleaned it and seasoned it with a few layers of oil. I think it will be far easier to clean from now on. The outside of the pan and bottom are still coated in whatever the inside was when I bought it.