13
submitted 1 year ago by little_tuptup@lemmy.ml to c/homelab@lemmy.ml

cross-posted from: https://lemmy.ml/post/6830939

Just bought Cyberpower OR700 1U UPS (20lbs). Will I need rack mount rails to support the back or will the cage nuts at the front be enough to support the UPS?

top 2 comments
sorted by: hot top controversial new old
[-] litchralee@sh.itjust.works 4 points 1 year ago

The product manual for the OR700 indicates that it comes with a set of rack mount brackets. A bit of searching with Google Images shows that these brackets are only supported by the front rails.

Generally speaking, a product's official rack-mount hardware is sufficient to support the product on its own, without anything pressing on it from above, and assuming all four screws (probably not included) are secured into cage nuts of the matching size and thread.

From my experience, 8 kg (18 lbs) for a device which is only 23 cm deep (9.2 in) is no cause from alarm, when installed with all 4 screws. Heavier appliances exist which also don't require a 4 post rack.

[-] Bldck@beehaw.org 3 points 1 year ago

I suspect you’ll need rails.

My server is in the 25# range and it has rails.

Some of my networking gear is in the 4-10# range and they don’t have rails.

this post was submitted on 21 Oct 2023
13 points (93.3% liked)

homelab

6584 readers
2 users here now

founded 4 years ago
MODERATORS