This is the place to discuss environmentalism, preservation, direct action and anything related to it!
RULES:
1- Remember the human
2- Link posts should come from a reputable source
3- All opinions are allowed but discussion must be in good faith
Related communities:
Unofficial Chat rooms:
So this "article" is just a regurgitation of a press release by the company making them. Cool. Cool, cool, cool.
Fire resistant? You know what can't catch fire? Wood.
I think wood can be pretty fire resistant.
Its also just a bunch of thin layers of wood glued together, so recyclable is also kinda bullshit. Stronger that carbon fiber is also questionable. Garbage article in general, it doesnt touch on any of these points.
20% cheaper is probably not good enough for more than 20% less performance output. A heavy blade can stand up, but be less responsive to wind force. They can still be recyclable by melting the glue/veneering, or just made into particle/OSB board.
Intriguing, but I find this somewhat hard to believe.
Glu-lam isn't new technology.
If you could achieve comparable strength: weight from timber as aluminium, GFRP, or CFRP, we'd see a high timber content in aircraft, instead of near zero.
If they're making the blades heavier to compensate, you get all kinds of runaway knock on effects. Blades are heavier, so need to be stronger, so need to be heavier... tower, bearings, foundations, mountings etc all need to be stronger.
Sort of an xkcd 808 argument.
With the right wood you can achieve similar levels of strength/weight with wood as aluminum, but the volume is much bigger, so you often only see small aircraft made of wood. However, there are multiple issues of working with wood, the grain can significantly alter it's properties, only very specific species can be used, requires pieces to be glued together in a very specific manner and the process of validating it for aircraft use is very complicated as well.
Source: studied airspace engineering
i mean i could certainly see timber used in some capacity, it works in regular buildings after all, but i don't see how it would make sense in the blades..
They have been using wood for windmill blades for hundreds of years
you do realize windmills and wind turbines are slightly different, right?
you're basically using a 2 story wood house to justify building a skyscraper out of wood, that's obviously not how it works, did you even think about this for 5 seconds lol?
This isn't reddit. You don't need to be so mean.
The larger old windmills could definitely be used as a comparison to modern wind turbines.
The arrogance.
Also, search for "Plyscraper".
They do make wind turbine towers out of wood in many places. Transportation advantages to it. Weight is non issue.
Explain to me how wood blades are fire resistant? That to me makes no sense.
Treated lumber is a thing, and in my experience it's harder to light than carbon fiber and resin.
My garage almost burned down once because I didn't notice sparks from my angle grinder were pooling on a CF/R panel, and it set off a couple other things (paper towel bar, shop towel, solvent residue close to the towel) while I ran to the extinguisher.
This "article" is just an ad, and shouldn't exist without actual journalism going on, but let's not pretend wood can't be fire resistant.
did you reply to the wrong comment? i specifically said that i don't think wood in the blades really makes sense
Call me back in 5 years and tell me that they still stand and produce electricity!
Do not underestimate wood. They make houses out of that stuff.
Even more impressive, I heard that TREES are made out of wood!
I'm gonna need a source on this one
Source: Trust me bro, my wife’s friend’s cousin was a tree.
Houses growing on trees fr
I wonder what the weight difference is.